ISLA112P50-55210EV1Z Daughter Board
Ultra Low Power Broadband 8 to 14-Bit Data Acquisition Platform
Quickly evaluate the amplifier, filter, & adc signal chain's total performance in your application. Mating to Intersil's ADC KMB-001LEVALZ motherboard, this amplifier + ADC daughterboard provides a 100kHz to 100Mhz flat data acquisition channel requiring only 200mVpp (-10dBm) full scale input signal. It interfaces directly with Intersil's proven ADC analysis Konverter software. Typically consuming <680mW in the amplifier + ADC, this example design also offers a starting point for customizing this board to specific end equipment requirements.
The input transformers, amplifier gain, and interstage filter design can be tuned for a given application, allowing a user to try different circuit configurations to evaluate performance tradeoffs. In addition, the 12-bit 500MSPS ADC can be swapped out for any of the 20 pin compatible ADCs from the Intersil low power ADC family. These low power ADC's span the 8- to 14-bit range with max sample rates from 125MSPS to 500MSPS.
- Clock Rate Range: 200MSPS to 500MSPS
- 200mV P-P Input (-10dBm) for -1dBFS ADC Input
- ±0.5dB flat response: 100kHz to 100MHz
- Typical SNR: 65dBFS
- Typical SFDR: 82dBC @ -1dBFS Input (10MHz to 100MHz Analog Input)
- Industrial Applications
- Data Acquisition
Measured FFT Performance (95MHz input at 500MSPS)
SNR = 64.8dBFS
SFDR =80dB at -1dBFS
ADC power = 498mW
|ISLA112P50/55210EV1Z User Guide||1149 kB|
Click arrow to left of Part Number to expand and collapse buying options. Expand All | Collapse All
|Part Number(s)||Availability||Lead Time||MLQ||DSCC SMD||Budgetary Price*|
* Price shown (USD) is the manufacturer's suggested retail price for quantities of 1K units. Prices in today's market are fluid and may change without notice. For higher volume price quotes or prices in local currency, please contact your local Intersil Sales Office or Authorized Distributor.
Disclaimer: THIS MATERIAL IS PROVIDED ‘AS-IS’ FOR EVALUATION PURPOSES ONLY. INTERSIL CORPORATION AND ITS SUBSIDIARIES (‘INTERSIL’) DISCLAIM ALL WARRANTIES, INCLUDING WITHOUT LIMITATION FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. Intersil provides evaluation platforms and design proposals to help our customers to develop products. However, factors beyond Intersil’s control, including without limitation component variations, temperature changes and PCB layout, could significantly affect Intersil product performance. It remains the customers' responsibility to verify the actual circuit performance.