Applications

Datasheet

CD40193BMS
CMOS Presettable Up/Down Counter (Dual Clock With Reset)

Typical Diagram

enlarge +typical diagram

Key Features

    • CD40192BMS - BCD Type
    • CD40193BMS - Binary Type
    • High Voltage Type (20V Rating)
    • Individual Clock Lines for Counting Up or Counting Down
    • Synchronous High-Speed Carry and Borrow Propagation Delays for Cascading
    • Asynchronous Reset and Preset Capability
    • Medium Speed Operation
      • fCL = 8MHz (typ.) at 10V
    • 5V, 10V and 15V Parametric Ratings
    • Standardize Symmetrical Output Characteristics
    • 100% Tested for Quiescent Current at 20V
    • Maximum Input Current of 1µA at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
    • Noise Margin (Over Full Package/Temperature Range)
      • 1V at VDD = 5V
      • 2V at VDD = 10V
      • 2.5V at VDD = 15V
    • Meets All Requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices"

Description

CD40192BMS Presettable BCD Up/Down Counter and the CD40193BMS Presettable Binary Up/Down Counter each consist of 4 synchronously clocked, gated "D" type flip-flops connected as a counter. The inputs consist of 4 individual jam lines, a PRESET ENABLE control, individual CLOCK UP and CLOCK DOWN signals and a master RESET. Four buffered Q signal outputs as well as CARRY and BORROW outputs for multiple-stage counting schemes are provided.

The counter is cleared so that all outputs are in a low state by a high on the RESET line. A RESET is accomplished asynchronously with the clock. Each output is individually programmable asynchronously with the clock to the level on the corresponding jam input when the PRESET ENABLE control is low.

The counter counts up one count on the positive clock edge of the CLOCK UP signal provided the CLOCK DOWN line is high. The counter counts down one count on the positive clock edge of the CLOCK DOWN signal provided the CLOCK UP line is high.

The CARRY and BORROW signals are high when the counter is counting up or down. The CARRY signal goes low one-half clock cycle after the counter reaches its maximum count in the count-up mode. The BORROW signal goes low one-half clock cycle after the counter reaches its minimum count in the countdown mode. Cascading of multiple packages is easily accomplished without the need for additional external circuitry by tying the BORROW and CARRY outputs to the CLOCK DOWN and CLOCK UP inputs, respectively, of the succeeding counter package.

The CD40192BMS and CD40193BMS are supplied in these 16-lead outline packages:

Braze Seal DIP *H4W, †H4X
Frit Seal DIP H1F
Ceramic Flatpack *H6P, †H6W

* CD40192B Only †CD40193B Only

Applications

    • Up/Down Difference Counting
    • Multistage Ripple Counting
    • Synchronous Frequency Dividers
    • A/D and D/A Conversion
    • Programmable Binary or BCD Counting

Alternatives

Design Tip

Are the Schottky clamp diodes required on the outputs when not driving MOSFETs?

See More »

Is there somewhere I can find out what simulations and models (e.g. Spice, PSpice, IBIS) are available on your website?

See More »

iSIM Simulator

Select a category to start designing:

Enter design requirements:

Min Max
Vin: V V
Vout Iout
Output: V A
Min Max
Vin: V V
Vout Iout
Output: V A
Desired Closed Loop Gain:
Desired Min. Bandwidth:

Support | Ask An Expert

Need tech support for a product or design?
(Support FAQs)

Ask »

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter