- QML Qualified per MIL-PRF-38535 Requirements
- High Slew Rate 100V/µs Min, 120V/µs (Typ)
- Wide Power Bandwidth 1.5MHz(Min)
- Wide Gain Bandwidth 10MHz Min, 20MHz (Typ)
- High Input Impedance 50MΩ Min, 100MΩ (Typ)
- Low Offset Current 25nA Min, 10nA (Typ)
- Fast Settling (0.1% of 10V Step) 200ns (Typ)
- Low Quiescent Supply Current 6mA (Max)
- Gamma Dose 1 x 104RAD(Si)
The HS-2520RH is a radiation hardened monolithic operational amplifier which delivers an unsurpassed combination of specifications for slew rate, bandwidth and settling time. This dielectrically isolated amplifier is designed for closed loop gains of 3 or greater without external compensation. In addition, this high performance component also provides low offset current and high input impedance.
The 100V/µs (Min) slew rate and fast settling time of this amplifier makes it an ideal component for pulse amplification and data acquisition designs. To insure compliance with slew rate and transient response specifications, all devices are 100% tested for AC performance characteristics over full temperature. This device is a valuable component for RF and video circuitry requiring wideband operation. For accurate signal conditioning designs, the HS-2520RH superior dynamic specifications are complemented by 25nA (Max) offset current and offset voltage trim capability.
Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-95685. A "hot-link" is provided on our homepage for downloading.
- Data Acquisition Systems
- RF Amplifiers
- Video Amplifiers
- Signal Generators
|AN9867: End of Life Derating: A Necessity or Over Kill|
End of Life Derating: A Necessity or Over Kill
13 Nov 2014
|13 Nov 2014||35 KB|
Radiation Hardened Uncompensated, High Slew Rate Operational Amplifier
14 Nov 2014
|14 Nov 2014||170 KB|
Standard Microcircuit Drawings
|SMD 5962-95685 (HS-2520RH)|
HS-2520RH electrically screened to Standard Microcircuit Drawing (SMD) 5962-95685.
|Intersil Commercial Lab Services|
Intersil Commercial Lab Services
18 Nov 2014
|18 Nov 2014||364 KB|