- VIN range 2.7V to 5.5V
- Up to 3A of output current
- Switching frequency is 1MHz or 2MHz
- 35µA quiescent current (ISL80031/A)
- Overcurrent and short-circuit protection
- Over-temperature/thermal protection
- Negative current protection
- Power-good and enable
- 100% duty cycle
- Internal soft-start and soft-stop
- VIN undervoltage lockout and VOUT overvoltage protection
- Up to 95% peak efficiency
The ISL80030, ISL80030A, ISL80031 and ISL80031A are highly efficient, monolithic, synchronous step-down DC/DC converters that can deliver up to 3A of continuous output current from a 2.7V to 5.5V input supply. They use peak current mode control architecture to allow very low duty cycle operation. These devices operate at either a 1MHz or 2MHz switching frequency, thereby providing superior transient response and allowing for the use of small inductors. They also have excellent stability.
The ISL80030, ISL80030A, ISL80031 and ISL80031A integrate very low rDS(ON) MOSFETs in order to maximize efficiency. In addition, since the high-side MOSFET is a PMOS, the need for a Boot capacitor is eliminated, thereby reducing external component count. They can operate at 100% duty cycle.
The ISL80031, ISL80031A are configured for PFM discontinuous conduction operation and provide high efficiency by reducing switching losses at light loads.
The ISL80030, ISL80030A are configured for PWM pulse width modulation operation and provide a fast transient response, which helps reduce the output noise and RF interference.
These devices are offered in a space saving 8 Ld 2mmx2mm DFN Pb-free package with exposed pad for improved thermal performance. The complete converter occupies less than 64mm2 area.
- General purpose POL
- Industrial, instrumentation and medical equipment
- Telecom and networking equipment
- Game console
|# of Outputs||1||1||1||1|
|VIN (min) (V)||2.7||2.7||2.7||2.7|
|VIN (max) (V)||5.5||5.5||5.5||5.5|
|VOUT (min) (V)||0.6||0.6||0.6||0.6|
|VOUT (max) (V)||5.5||5.5||5.5||5.5|
|IOUT (max) (A)||3||3||2||1.5|
|IQ||7 mA||35 µA||7 mA||7 mA|
|Switching Freq. (max)||1 MHz||1 MHz||1 MHz||1 MHz|
|Switching Freq. (min)||1 MHz||1 MHz||1 MHz||1 MHz|
|Max Duty Cycle (%)||100||100||100||100|
|Peak Efficiency (%)||95||95||95||95|
|BOM Total Footprint||64 mm2||64 mm2||64 mm2||64 mm2|
|Control Type||Current Mode||Current Mode||Current Mode||Current Mode|
Pack the Most Power in the Smallest Space!
Intersil's comprehensive portfolio of low voltage, synchronous buck integrated FET switching regulators offer a compact solution size with outstanding performance.
|AN9208: High Frequency Power Converters|
High Frequency Power Converters
13 Nov 2014
|13 Nov 2014||78 KB|
|ISL80030, ISL80030A, ISL80031, ISL80031A Datasheet|
3A Synchronous Buck Converter In 2x2 DFN Package
20 Jul 2015
|20 Jul 2015||920 KB|
|ISL80030DEMO1Z Design Files|
BOM, Schematic and Art Files for the ISL80030DEMO1Z Evaluation Board
|ISL80030, ISL80030A iSim Model|
iSim Model for ISL80030 and ISL80030A
|ISL8003xDEMO1Z User Guide|
ISL8003xDEMO1Z Demonstration Boards User Guide
14 Jul 2016
|14 Jul 2016||343 KB|