- Dual output, 6A peak currents, can be paralleled
- Dual AND-ed input logic, (INput and ENable)
- Typical ON-resistance <1Ω
- Specified Miller plateau drive currents
- Very low thermal impedance (θJC = 3°C/W)
- Hysteretic Input logic levels for 3.3V CMOS, 5V CMOS, TTL and Logic levels proportional to VDD
- Precision threshold inputs for time delays with external RC components
- 20ns rise and fall time driving a 10nF load.
The ISL89163, ISL89164, and ISL89165 are high-speed, 6A, dual channel MOSFET drivers with enable inputs. These parts are very similar to the ISL89160, ISL89161, ISL89162 drivers but with an added enable input for each channel occupying NC pins 1 and 8 of the ISL89160, ISL89161, ISL89162.
Precision thresholds on all logic inputs allow the use of external RC circuits to generate accurate and stable time delays on both the main channel inputs, INA and INB, and the enable inputs, ENA and ENB. The precision delays capable of these precise logic thresholds makes these parts very useful for dead time control and synchronous rectifiers. Note that the ENable and INput logic inputs can be interchanged for alternate logic implementations.
Three input logic thresholds are available: 3.3V (CMOS), 5.0V (CMOS or TTL compatible), and CMOS thresholds that are proportional to VDD.
At high switching frequencies, these MOSFET drivers use very little internal bias currents. Separate, non-overlapping drive circuits are used to drive each CMOS output FET to prevent shoot-thru currents in the output stage.
The start-up sequence is design to prevent unexpected glitches when VDD is being turned on or turned off. When VDD < ~1V, an internal 10kΩ resistor between the output and ground helps to keep the output voltage low. When ~1V < VDD < UV, both outputs are driven low with very low resistance and the logic inputs are ignored. This insures that the driven FETs are off. When VDD > UVLO, and after a short delay, the outputs now respond to the logic inputs.
- Synchronous Rectifier (SR) Driver
- Switch mode power supplies
- Motor Drives, Class D amplifiers, UPS, Inverters
- Pulse Transformer driver
- Clock/Line driver
|# of Drivers||2||2||2||2|
|VIN (max) (V)||16||16||16||15|
|Max Operating Frequency||10 MHz||10 MHz||10 MHz||10 MHz|
|Peak Output Current IPK||6 A||6 A||6 A||2 A|
|Rise Time||20 ns||20 ns||20 ns||20 ns|
|Fall Time||20 ns||20 ns||20 ns||20 ns|
|Turn On Delay (ns)||25||25||25||20|
|Turn Off Delay (ns)||25||25||25||20|
|IS||5 mA||5 mA||5 mA||3 mA|
|VBIAS (min)||4.5 V||4.5 V||4.5 V||4.5 V|
|RON||2 Ω||2 Ω||1 Ω||4 Ω|
|Input Signal Range (V)||0 to VP||0 to VP||0 to 16||0 to VP|
|Input Supply Range VP (V)||+4.5 to +16||+4.5 to +16||+4.5 to +16||+4.5 to +15|
|Output Signal Range (V)||0 to +16||0 to +16||0 to +16||0 to +15|
|AN1116: Elantec CMOS applications|
CMOS Applications Information
13 Nov 2014
|13 Nov 2014||231 KB|
|ISL89163, ISL89164, ISL89165 Datasheet|
High Speed, Dual Channel, 6A, Power MOSFET Driver with Enable Inputs
30 Sep 2015
|30 Sep 2015||441 KB|