Display ICs: Analog Front Ends, Ambient Light Sensors, Backlight Drivers, Gamma Buffers, Integrated DC-DC Regulators, OLED Power ICs, VCOM Amplifiers, White LED Drivers

All Intersil Products | Handheld Solutions Linecard | Product Selection Guide

Intersil offers a broad portfolio of products for the fast-growing LCD display market. The family of display ICs includes gamma buffers, DC-DC regulators, and digitally controlled potentiometers (DCPs) that provide a complete analog solution for high performance LCD displays. Combined, these products provide the analog supply voltage, VCOM reference, voltage-on and voltage-off bias voltages, and the gamma reference voltages that feed the column drivers in LCD displays. Intersil’s DC-DC regulators power the low voltage digital ICs used in LCD displays and DCPs control the LCD contrast and brightness. Intersil continues to innovate in the display area with the smallest, most power-efficient products for LCD monitors, TVs, notebook displays, and industrial and medical LCD applications.

Sortable Selection Tables

Display ICs

V_COM and Gamma Buffers

Integrated DC/DC Regulators

Ambient Light Sensors

White LED Drivers

OLED Power ICs

LCD and LED Display Drivers

Level Shifters

New Products


ISL29009	July 2008

Non-Linear Output Current, Low Power Ambient Light Photo Detect IC
The ISL29009 is a light-to-current silicon optical sensor combining a photodiode and current amplifiers on a single monolithic IC. Similar to human eyes, the photodiode has peak sensitivity at 550nm and spans from 400nm to 700nm, rejecting UV light and IR light. The input luminance range is from 0.3 lux to 10,000 lux. More

Datasheet Device Information


ISL29101	July 2008

Small, Low Power, Voltage-Output Ambient Light Photo Detect IC
The ISL29101 is a low power ambient Light-to-Voltage optical sensor combining a photodiode array, a current amplifier and a micropower operational amplifier on a single monolithic IC. Similar to the human eye, the photodiode array has a peak response at 550nm and spans from 400nm to 600nm, rejecting UV light and IR light. The output voltage is proportional to the visible light intensity from 0.5 lux up to 10,000 lux. However, the input luminance range can go up to 30,000 lux with some compromise in linearity. More

Datasheet Device Information


ISL29102	July 2008

Low Power Ambient Light-to-Voltage Non-Linear Converter
The ISL29102 is a low cost light-to-voltage silicon optical sensor combining a photodiode array, a non-linear current amplifier and a micro-power op amp on a single monolithic IC. Similar to human eyes, the photodiode array has peak sensitivity at 550nm and spans from 400nm to 600nm, rejecting UV light and IR light. The input luminance range is from 0.3 lux to 10,000 lux. More

Datasheet Device Information


Most Recent Application Notes

ISL97656 SEPIC for 3V_IN to 12V_IN to 3.3V_OUT at 1A Application

Single-Stage 5V USB Voltage Regulator

Rail-to-Rail Amplifier Extends Resolution and Range of Light Sensor

Making Sense of Light Sensors

Avoid Instability in Rail-to-Rail CMOS Amplifiers

Boost Converter Generates +5V at 375mA from Wide Range Negative Input Supply

More Application Notes