Applications

新产品

End Market Specific

ISL78223
January 2013
ZVS Full-Bridge PWM Controller with Adjustable Synchronous Rectifier Control

The ISL78223 is a high-performance zero-voltage switching (ZVS) full-bridge PWM controller. It achieves ZVS operation by driving the upper bridge FETs at a fixed 50% duty cycle while the lower bridge FETs are  More

ISL76123
September 2012
Automotive Single Supply, SPDT Analog Switch

The Intersil ISL76123 device is a small precision, bidirectional, single-pole/double throw (SPDT) analog switch, designed to operate from a single +2.7V to +12V supply. The device is supplied in a 6 Ld SOT-23 package. Targeted applications include automotive battery powered systems that can benefit from the device’s low power consumption (5µW), low leakage currents (3nA max), and fast switching speeds (tON = 28ns, tOFF = 20ns). This device will often find use in infotainment systems to “mux - in” additional functions to GPIO pins on SOCs. The device ensures the switching function is always break-before-make to help eliminate transient signal problems. Its small package size alleviates board space limitations. The part has been qualified for use in automotive applications over an operating temperature range of -40°C to +105°C.  More

ISL78420
September 2012
100V, 2A Peak, Half-Bridge Driver with Tri-Level PWM Input and Adjustable Dead-Time

The ISL78420 is a 100V, high frequency, half-bridge MOSFET driver with a tri-level PWM input. This part is a derivative of the HIP2121 half-bridge driver. The non-automotive version of the ISL78420 is the HIP2124.  More

ISL78600
September 2012
Multi-Cell Li-Ion Battery Manager

The ISL78600 is a Li-ion battery manager IC that supervises up to 12 series connected cells. The part performs accurate monitoring, cell balancing and extensive system diagnostics functions. Three cell balancing modes are provided: Manual Balance mode, Timed Balance mode, and Auto Balance mode, which terminates balancing functions when a (host microcontroller specified) charge transfer value has been met.  More

ISL55163
June 2012
SOC Dual Channel 400MHz Pin Electronics/DAC/PMU

The ISL55163 is a highly integrated System-on-a-Chip (SOC) pin electronics solution aimed at incorporating every analog function, along with some digital support functionality, required on a per channel basis for Automated Test Equipment. The interface, control and I/O of the chip are all digital; all analog circuitry is inside the chip. Two complete tester channels are integrated into each ISL55163. The ISL55163 is pin compatible with Venus4.   More

ISL1561
June 2012
Fixed Gain Dual Port Class-G Differential xDSL Line Driver

The ISL1561 is a fixed gain dual port class-G differential amplifier designed for driving full rate ADSL2+ and VDSL2 signals at very low power dissipation. The driver runs on a single +14V power supply and internally generates higher supply voltages when needed to enable power efficient operation for high peak-to-average ratio (PAR) ADSL2+ and VDSL2 signals.  More

ISL78302A
June 2012
Dual LDO with Low Noise, Very High PSRR and Low IQ

ISL78302A is a high-performance dual LDO capable of sourcing 300mA current from each output. It has a low standby current and very high PSRR and is stable with output capacitance of 1µF to 10µF with ESR of up to 200mΩ.  More

ISL58797
May 2012
Laser Diode Driver with Write Current DAC and PDIC Control Outputs

The ISL58797 is a highly integrated, single supply laser diode driver designed to support multi-standard writable optical drives in CD, DVD, and Blue Ray formats at various speeds. It is a ‘hybrid’ part having an interface compatible with a conventional LDD, but an internal architecture similar to a write strategy LDD. This combination adds versatility to the conventional interface. The ISL58797 also features PDIC (OEIC) control pins; which help reduce the signal lines on the Flex cables.  More

ISL1550
March 2012
Single Port, VDSL2 Differential Line Driver

The ISL1550 is a dual operational amplifier intended to be used as a differential line driver. ISL1550s high bandwidth and low distortion performance enables the support of VDSL2 8b, 17a and 30a modem applications.  More

iSIM仿真器

选择一个种类开始设计:

输入设计要求:

输入设计要求:

需要的闭环增益:
需要的最小带宽:

在线技术支持

在线提交技术问题,由我们的专家为您解答。

提问 »

焦点

Signal Path Products

Signal Path Products
下载 »

Power Management

Power Management
下载 »

Automotive Display Products

Automotive Display Products
下载 »

Communications Infrastructure Solutions

Communications Infrastructure Solutions
下载 »

Digital Potentiometers

Digital Potentiometers
下载 »

Intersil信息交换中心

推出新的逐片低剂量辐射验收工具

Intersil的太空集成电路团队
Intersil 公司

Watch »

数字电源模块:效率和智能

Michael Althar
Intersil多市场电源产品部
副总裁兼总经理

Watch »

检测、验证、改进

Nick van Vonno
Intersil辐射测试专家

Watch »

Intersil的电源模块解决了5个设计难题

Michael Althar
Intersil多市场电源产品部
副总裁兼总经理

Watch »

电源模块的未来

Michael Althar
Intersil多市场电源产品部
副总裁兼总经理

Watch »

您的集成电路为真正的太空环境做好准备了吗?

Nick van Vonno
Intersil辐射测试专家

Watch »

使锂离子电池更安全

Intersil
汽车产品线团队

Watch »

4种方式Intersil让汽车更智能

Intersil
汽车产品线团队

Watch »

使用超快显示处理器提高安全性

Intersil
汽车产品线团队

Watch »

提高功率效率

Niall Lyne
汽车产品线总监

Watch »

使用光传感器增强可视性

Niall Lyne
汽车产品线总监

Watch »

在现有同轴电缆基础设施的基础上,升级到高清视频

Huibert Verhoeven
Intersil混合信号产品线团队

Watch »

按产品型号搜索定价和供货信息。订购零件、评估板和样品。

联系销售 »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter