HS-5104ARH
Low Noise Quad Operational Amplifier
Typical Diagram
Key Features
- Electrically Screened to SMD # 5962-95690
- QML Qualified per MIL-PRF-38535 Requirements
- Radiation Environment
- Gamma Dose 1 x 105RAD(Si)
- Low Noise
- At 1kHz 4.3nV/√Hz (Typ)
- At 1kHz 0.6pA/√Hz (Typ)
- Low Offset Voltage 3.0mV (Max)
- High Slew Rate 2.0V/µs (Typ)
- Gain Bandwidth Product 8.0MHz (Typ)
Description
The HS-5104ARH is a radiation hardened, monolithic quad operational amplifier that provides highly reliable performance in harsh radiation environments. Its excellent noise characteristics coupled with an unique array of dynamic specifications make this amplifier well-suited for a variety of satellite system applications. Dielectrically isolated, bipolar processing makes this device immune to Single Event Latch-Up.
The HS-5104ARH shows almost no change in offset voltage after exposure to 100kRAD(Si) gamma radiation, with only a minor increase in current. Complementing these specifications is a post radiation open loop gain in excess of 40K.
This quad operational amplifier is available in an industry standard pinout, allowing for immediate interchangeability with most other quad operational amplifiers.
Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are contained in SMD 5962-95690. A "hot-link" is provided on our homepage for downloading.
http://www.intersil.com
Applications
- High Q, Active Filters
- Voltage Regulators
- Integrators
- Signal Generators
- Voltage References
- Space Environments
