Applications

Datasheet

HS-3530ARH
Radiation Hardened Programmable Low Power Op Amps

Typical Diagram

Diagram Not Shown

Key Features

    • Radiation Performance
      • Gamma Dose: 3 x 105 RAD(Si)
      • SEL: Immune (RSG DI Process)
      • Low dose rate: 100krad(Si)*
        *Product capability established by initial characterization. The EH version is acceptance tested on a wafer by wafer basis to 50krad(Si) at low dose rate.
    • Wide Range AC Programming
      • Slew Rate: 0.025 to 0.1V/µs
      • Gain X Bandwidth: 30kHz to 750kHz
    • Wide Range DC Programming
      • Power Supply Range: ±3.0V to ±15V
    • Supply Current: 15µA to 150µA
    • Output Current: 0.25mA to 2.5mA
    • Quiescent Power: 4.8mW (Max)
    • Dielectrically Isolated Device Islands
    • Short Circuit Protection
    • Full -55°C to +125°C Military Temperature Range

Description

The HS-3530ARH, HS-3530AEH are Low Power Operational Amplifiers, which are internally compensated monolithic devices offering a wide range of performance specifications. Parameters such as power dissipation, slew rate, bandwidth, noise and input DC parameters are programmed by selecting an external resistor or current source. Supply voltages as low as ±3V may be used with little degradation of AC performance. The HS-3530ARH, HS-3530AEH have been specifically designed to meet exposure to space radiation environments. Operation from -55°C to +125°C is guaranteed.

A major advantage of the HS-3530ARH, HS-3530AEH is that operating characteristics remain virtually constant over a wide supply range (±3V to ±15V), allowing the amplifiers to offer maximum performance in almost any system, including battery operated equipment. A primary application for these devices is in active filtering and conditioning for a wide variety of signals that differ in frequency and amplitude. Also, by modulating the set current, they can be used for designs such as current controlled oscillators/modulators, sample and hold circuits and variable active filters.

Specifications
Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed below must be used when ordering.

Detailed Electrical Specifications for the HS-3530ARH, HS-3530AEH are contained in SMD 5962-95687. A “hot-link” to the DLA website is also provided on the Product Information page for downloading the document.

Alternatives

Design Tip

Are the Schottky clamp diodes required on the outputs when not driving MOSFETs?

See More »

Is there somewhere I can find out what simulations and models (e.g. Spice, PSpice, IBIS) are available on your website?

See More »

iSIM Simulator

Select a category to start designing:

Enter design requirements:

Enter design requirements:

Desired Closed Loop Gain:
Desired Min. Bandwidth:

Support | Ask An Expert

Need tech support for a product or design?
(Support FAQs)

Ask »

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter