HS-2700RH
Low Power, High Performance Rad-Hard Operational Amplifier

Key Features

• Electrically Screened to SMD # 5962-95670
• QML Qualified per MIL-PRF-38535 Requirements
• Low Power Supply Current 150µA (Max)
  90µA (Typ)
• High CMRR 86dB (Min)
  106dB (Typ)
• Low Input Bias Current 20nA (Min)
  5nA (Typ)
• Low Offset Current 10nA (Min)
  2.5nA (Typ)
• Total Dose 1 x 10⁴ RAD(Si)

Description

HS-2700RH is radiation hardened internally compensated operational amplifiers which employ dielectric isolation to achieve excellent DC and dynamic performance with very low quiescent power consumption.

DC performance of the amplifier input is characterized by high CMRR (106dB), low offset voltage (0.5mV), along with low bias and offset current (5.0nA and 2.5nA respectively). These input specifications, in conjunction with offset null capability and open-loop gain of 300,000V/V, enable HS-2700RH to provide accurate, high-gain signal amplification. Gain bandwidth 1MHz and slew rate of 20V/µs allow for processing of fast, wideband signals. Input and output signal amplitudes of at least ±11V can be accommodated while providing output drive capability of 10mA. For maximum reliability, the output is protected in the event of short circuits to ground.

The amplifier operates from a wide range of supplies (±5.5V to ±20V) with a maximum quiescent supply drain of only 150µA. HS-2700RH is therefore, ideally suited to low-power instrumentation and filtering applications that require fast, accurate response over a wide range of signal frequency.

Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering.

Detailed Electrical Specifications for these devices are contained in SMD 5962-95670. A "hot-link" is provided on our homepage for downloading.
www.intersil.com/spacedefense/space.asp

Applications

• High Gain Amplifier
• Instrumentation Amplifiers
• Active Filters
• Telemetry Systems
• Battery-Powered Equipment