Applications

Datasheet

HS-508BRH
Radiation Hardened 8 Channel CMOS Analog Multiplexer with Overvoltage Protection

Typical Diagram

enlarge +typical diagram

Key Features

    • Electrically Screened to SMD # 5962-96742
    • QML Qualified per MIL-PRF-38535 Requirements
    • Radiation Environment
      • Gamma Dose (γ): 3 x 105 Rad (Si)
      • Dielectrically Isolated Device Islands
      • SEP >100 Mev-mg/cm2
    • Analog/Digital Overvoltage Protection
    • ESD Rated to 3kV
    • Fail Safe with Power Loss (No Latchup)
    • Break-Before-Make Switching
    • (Typ) DTL/TTL and CMOS Compatible Threshold
    • Analog Signal Range: ±15V
    • Fast Access Time
    • Supply Current at 1MHz Address Toggle: 4mA (Typ)
    • Standby Power: 7.5mW (Typ)
    • Pb-Free (RoHS Compliant)

Description

The HS-508BRH, HS-508BEH are dielectrically isolated, radiation hardened, CMOS analog multiplexers incorporating an important feature; they withstand analog input voltages much greater than the supplies. This is essential in any system where the analog inputs originate outside the equipment. They can withstand a continuous input up to 10V greater than either supply, which eliminates the possibility of damage when supplies are off, but input signals are present. Equally important, they can withstand brief input transient spikes of several hundred volts; which otherwise would require complex external protection networks. Necessarily, ON resistance is somewhat higher than similar unprotected devices, but very low leakage current combine to produce low errors. Reference Application Notes 520 and 521 for further information on the HS-508BRH,
HS-508BEH multiplexers in general.

The HS-508BRH, HS-508BEH have been specifically designed to meet exposure to radiation environments. Operation from -55°C to +125°C is guaranteed.

Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed here must be used when ordering.

Detailed Electrical Specifications for these devices are contained in SMD 5962-96742. A "hot-link" is provided on our homepage for downloading. http://www.landandmaritime.dla.mil/Downloads/MilSpec/Smd/96742.pdf

Design Tip

Are the Schottky clamp diodes required on the outputs when not driving MOSFETs?

See More »

Is there somewhere I can find out what simulations and models (e.g. Spice, PSpice, IBIS) are available on your website?

See More »

iSIM Simulator

Select a category to start designing:

Enter design requirements:

Enter design requirements:

Desired Closed Loop Gain:
Desired Min. Bandwidth:

Support | Ask An Expert

Need tech support for a product or design?
(Support FAQs)

Ask »

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter