HS-26CLV32RH
Radiation Hardened 3.3V Quad Differential Line Receiver
Key Features
- Electrically screened to SMD # 5962-95689
- QML qualified per MIL-PRF-38535 requirements
- 1.2 micron radiation hardened CMOS
- Total dose: 300 krad(Si)(max)
- Single event upset LET: 100MeV/mg/cm2
- Single event latch-up immune
- Low stand-by current: 13mA(max)
- Operating supply range: 3.0V to 3.6V
- Enable input levels: VIH > (0.7)(VDD); VIL < (0.3)(VDD)
- CMOS output levels: VOH > 2.55V; VOL < 0.4V
- Input fail safe circuitry
- High impedance inputs when disabled or powered-down
- Full -55°C to +125°C military temperature range
- Pb-free (RoHS compliant)
Description
The Intersil HS-26CLV32RH is a radiation hardened 3.3V quad differential line receiver designed for digital data transmission over balanced lines, in low voltage, RS-422 protocol applications. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments.
The HS-26CLV32RH has an input sensitivity of 200mV (Typ) over a common mode input voltage range of -4V to +7V. The receivers are also equipped with input fail safe circuitry, which causes the outputs to go to a logic “1” when the inputs are open. The device has unique inputs that remain high impedance when the receiver is disabled or powered-down, maintaining signal integrity in multi-receiver applications.
Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are contained in SMD 5962-95689.
Applications
- Line receiver for MIL-STD-1553 serial data bus
