Applications

Datasheet

ISL9000AM
Dual LDO with Low Noise, Very High PSRR and Low IQ

Typical Diagram

enlarge +typical diagram

Key Features

    • Integrates Two 100mA High Performance LDO's
    • IOUT per Channel is 50mA at TJ = +150°C
    • Excellent Transient Response to Large Current Steps
    • ±1.8% Accuracy Over all Operating Conditions
    • Excellent Load Regulation: <0.1% Voltage Change Across Full Range of Load Current
    • Low Output Noise: Typically 30µVrms @ 100µA (1.5V)
    • Very High PSRR: 90dB @ 1kHz
    • Extremely Low Quiescent Current: 42µA (both LDOs active)
    • Wide Input Voltage Capability: 2.3V to 5.5V
    • Low Dropout Voltage: Typically 200mV @ 100mA
    • Stable with 1µF to 10µF Ceramic Capacitors
    • Separate Enable and POR Pins for Each LDO
    • Soft-Start and Staged Turn-On to Limit Input Current Surge During Enable
    • Current Limit and Overheat Protection
    • Tiny 10 Ld 3x3mm DFN Package
    • -55°C to +125°C Operating Temperature Range

Description

ISL9000AMRNCP is a high performance dual LDO capable of sourcing 100mA current from each output. It has a low standby current and very high PSRR and is stable with output capacitance of 1µF to 10µF with ESR of up to 200mΩ.

The device integrates an individual Power-On-Reset (POR) function for each output. The POR delay for VO2 can be externally programmed by connecting a timing capacitor to the CPOR pin. The POR delay for VO1 is internally fixed at approximately 2ms. A reference bypass pin is also provided for connecting a noise filtering capacitor for low noise and high-PSRR applications.

The quiescent current is typically only 42µA with both LDO's enabled and active. Separate enable pins control each individual LDO output. When both enable pins are low, the device is in shutdown, typically drawing less than 0.1µA. Output voltage for the LDO are VOUT1 = 3.3V and VOUT2 = 1.8V.

Device Information
The specifications for an Enhanced Product (EP) device are defined in a Vendor Item Drawing (VID), which is controlled by the Defense Supply Center in Columbus (DSCC).

"Hot-links" to the applicable VID and other supporting application information are provided on our website.

Applications

    • PDAs, Cell Phones and Smart Phones
    • Portable Instruments, MP3 Players
    • Handheld Devices including Medical Handheld

Alternatives

Design Tip

Are the Schottky clamp diodes required on the outputs when not driving MOSFETs?

See More »

Is there somewhere I can find out what simulations and models (e.g. Spice, PSpice, IBIS) are available on your website?

See More »

iSIM Simulator

Select a category to start designing:

Enter design requirements:

Enter design requirements:

Desired Closed Loop Gain:
Desired Min. Bandwidth:

Support | Ask An Expert

Need tech support for a product or design?
(Support FAQs)

Ask »

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter