Datasheet

EL7530
Monolithic 600mA Step-Down Regulator with Low Quiescent Current

Not Recommended for New Designs.
Recommended Replacement Part ISL9106 (Not Pin-for-Pin).

Overview
Parametrics
Documents
Packaging and Environmental
Resources
Order

Typical Diagram

enlarge +

Key Features

Less than 0.18in² footprint for the complete 600mA converter
Components on one side of PCB
Max height 1.1mm MSOP10
Power-Good (PG) output
Internally-compensated voltage mode controller
Up to 95% efficiency
<1µA shut-down current
120µA quiescent current
Overcurrent and over-temperature protection
External synchronizable up to 12MHz
Pb-Free plus anneal available (RoHS compliant)

Description

The EL7530 is a synchronous, integrated FET 600mA step-down regulator with internal compensation. It operates with an input voltage range from 2.5V to 5.5V, which accommodates supplies of 3.3V, 5V, or a Li-Ion battery source. The output can be externally set from 0.8V to VIN with a resistive divider.

The EL7530 features automatic PFM/PWM mode control, or PWM mode only. The PWM frequency is typically 1.4MHz and can be synchronized up to 12MHz. The typical no load quiescent current is only 120µA. Additional features include a Power-Good output, <1µA shut-down current, short-circuit protection, and over-temperature protection.

The EL7530 is available in the 10-pin MSOP package, making the the entire converter occupy less than 0.18n2 of PCB area with components on one side only. The 10-pin MSOP package is specified for operation over the full -40°C to +85°C temperature range.