Applications

Datasheet

IPM6220
Multi-Output System Electronics Regulator for Mobile PCs

Typical Diagram

Diagram Not Shown

Key Features

    • Provides Five Regulated Voltages
      • +5V ALWAYS
      • +3.3V ALWAYS
      • +5V Main
      • +3.3V Main
      • +12V
    • High Efficiency Over Wide Line and Load Range
      • Synchronous Buck Converters on Main Outputs
      • Hysteretic Operation at Light Load
    • No Current-Sense Resistor Required
      • Uses MOSFET's rDS(ON)
      • Optional Current-Sense Resistor for More Precision
    • Operates Directly From Battery 5.6 to 22V Input
    • Input Undervoltage Lock-Out (UVLO)
    • Excellent Dynamic Response
      • Voltage Feed-Forward and Current-Mode Control
    • Monitors Output Voltages
    • Synchronous Converters Operate Out of Phase
    • Separate Shut-Down Pins for Advanced Configuration and Power Interface (ACPI) Compatibility
    • 300kHz Fixed Switching Frequency on Main Outputs
    • Thermal Shut-Down Protection

Description

The IPM6220 provides a highly integrated power control and protection solution for five output voltages required in highperformance notebook PC applications. The IC integrates three fixed frequency pulse-width-modulation (PWM) controllers and two linear regulators along with monitoring and protection circuitry into a single 24 lead SSOP package.

The two PWM controllers that regulate the system main 5V and 3.3V voltages are implemented with synchronousrectified buck converters. Synchronous rectification and hysteretic operation at light loads contribute to high efficiency over a wide range of input voltage and load variation. Efficiency is further enhanced by using the lower MOSFET's rDS(ON) as the current sense element. Input voltage feedforward ramp modulation, current-mode control, and internal feed-back compensation provide fast and stable handling of input voltage load transients encountered in advanced portable computer chip sets.

The third PWM controller is a boost converter that regulates a resistor selectable output voltage of nominally 12V.

Two internal linear regulators provide +5V ALWAYS and +3.3V ALWAYS low current outputs required by the notebook system controller.

Applications

    • Mobile PCs
    • Hand-Held Portable Instruments

Alternatives

Design Tip

What are the MOSFET Driver Dynamics and Current Sense Methods that one needs to be concerned about in PWM Converters?

See More »

Is there somewhere I can find out what simulations and models (e.g. Spice, PSpice, IBIS) are available on your website?

See More »

iSIM Simulator

Select a category to start designing:

Enter design requirements:

Enter design requirements:

Desired Closed Loop Gain:
Desired Min. Bandwidth:

Support | Ask An Expert

Need tech support for a product or design?
(Support FAQs)

Ask »

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter