ISL6523
VRM8.5 Dual PWM and Dual Linear Power System Controller
Key Features
- Provides 4 Regulated Voltages
- Microprocessor Core, AGTL+ Bus, AGP Bus Power, and North/South Bridge Core
- Drives N-Channel MOSFETs
- Linear Regulator Drives Compatible with both MOSFET and Bipolar Series Pass Transistors
- Simple Single-Loop Control Designs
- Voltage-Mode PWM Control
- Fast PWM Converter Transient Response
- High-Bandwidth Error Amplifiers
- Full 0% to 100% Duty Ratios
- Excellent Output Voltage Regulation
- Core PWM Output ±1% Over Temperature
- All Other Outputs ±3% Over Temperature
- VRM8.5 TTL-Compatible 5-Bit DAC Microprocessor Core Output Voltage Selection
- Wide Range 1.050V to 1.825V
- Power-Good Output Voltage Monitors
- Separate delayed VTT Power Good
- Overcurrent Fault Monitors
- Switching Regulators Do Not Require Extra Current Sensing Elements, Use MOSFET's rDS(ON)
- Small Converter Size
- Constant Frequency Operation
- 200kHz Internal Oscillator
- Pb-free available
Description
The ISL6523 provides the power control and protection for four output voltages in high-performance microprocessor and computer applications. The IC integrates two PWM controllers and two linear controllers, as well as the monitoring and protection functions into a 28-pin SOIC package. One PWM controller regulates the microprocessor core voltage with a synchronous-rectified buck converter. The second PWM controller supplies the computer system's AGTL+ 1.2V bus power with a standard buck converter. The linear controllers regulate power for the 1.5V AGP bus and the 1.8V power for the chipset core voltage and/or cache memory circuits.
The ISL6523 includes an Intel VRM8.5 compatible, TTL 5- input digital-to-analog converter (DAC) that adjusts the microprocessor core-targeted PWM output voltage from 1.050V to 1.825V in 25mV steps. The precision reference and voltage-mode control provide ±1% static regulation. The second PWM controller's output provides a voltage level of 1.2V with ±3% accuracy. The linear regulators use external N-channel MOSFETs or bipolar NPN pass transistors to provide fixed output voltages of 1.5V ±3% (VOUT3) and 1.8V ±3% (VOUT4).
The ISL6523 monitors all the output voltages. A delayedrising VTT (standard buck output) Power Good signal is issued before the core PWM starts to ramp up. Another system Power Good signal is issued when the core is within ±10% of the DAC setting and all other outputs are above their under- voltage levels. Additional built-in overvoltage protection for the core output uses the lower MOSFET to prevent output voltages above 115% of the DAC setting. The PWM controllers' overcurrent function monitors the output current by using the voltage drop across the upper MOSFET's rDS(ON), eliminating the need for a current sensing resistor.
Applications
- Motherboard Power Regulation for Computers
