Applications

Datasheet

HA-5020
100MHz Current Feedback Video Amplifier With Disable

Typical Diagram

enlarge +typical diagram

Key Features

    • Wide Unity Gain Bandwidth 100MHz
    • Slew Rate 800V/µs
    • Output Current ±30mA (Min)
    • Drives 3.5V into 75Ω
    • Differential Gain 0.03%
    • Differential Phase 0.03°
    • Low Input Voltage Noise 4.5nV/√Hz
    • Low Supply Current 10mA (Max)
    • Wide Supply Range ±5V to ±15V
    • Output Enable/Disable
    • High Performance Replacement for EL2020
    • Pb-Free Plus Anneal Available (RoHS Compliant)

Description

The HA-5020 is a wide bandwidth, high slew rate amplifier optimized for video applications and gains between 1 and 10. Manufactured on Intersil's Reduced Feature Complementary Bipolar DI process, this amplifier uses current mode feedback to maintain higher bandwidth at a given gain than conventional voltage feedback amplifiers. Since it is a closed loop device, the HA-5020 offers better gain accuracy and lower distortion than open loop buffers.

The HA-5020 features low differential gain and phase and will drive two double terminated 75Ω coax cables to video levels with low distortion. Adding a gain flatness performance of 0.1dB makes this amplifier ideal for demanding video applications. The bandwidth and slew rate of the HA-5020 are relatively independent of closed loop gain. The 100MHz unity gain bandwidth only decreases to 60MHz at a gain of 10. The HA-5020 used in place of a conventional op amp will yield a significant improvement in the speed power product. To further reduce power, HA-5020 has a disable function which significantly reduces supply current, while forcing the output to a true high impedance state. This allows the outputs of multiple amplifiers to be wire-OR'd into multiplexer configurations. The device also includes output short circuit protection and output offset voltage adjustment.

For multi channel versions of the HA-5020 see the HA5022 dual with disable, HA5023 dual, HA5013 triple and HA5024 quad with disable op amp data sheets.

Applications

    • Unity Gain Video/Wideband Buffer
    • Video Gain Block
    • Video Distribution Amp/Coax Cable Driver
    • Flash A/D Driver
    • Waveform Generator Output Driver
    • Current to Voltage Converter; D/A Output Buffer
    • Radar Systems
    • Imaging Systems

Alternatives

Design Tip

Can I use a current feedback amplifier (CFA) as an open loop comparator?

See More »

Is there somewhere I can find out what simulations and models (e.g. Spice, PSpice, IBIS) are available on your website?

See More »

iSIM Simulator

Select a category to start designing:

Enter design requirements:

Enter design requirements:

Desired Closed Loop Gain:
Desired Min. Bandwidth:

Support | Ask An Expert

Need tech support for a product or design?
(Support FAQs)

Ask »

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter