Applications

Related Resources

Photos

ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E
ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E

Sep 28 2007
Low Res | High Res

News & Events
World's Most Power-Efficient RS-485/RS-422 Single Receiver Delivers Superior IEC61000 ESD Protection in Space-Saving Packages

— ISL328xE Series Provides Rugged 16.5kV IEC61000 ESD Protection on Inputs While Drawing 30 Times Less Power Than Competitive Device


MILPITAS, CA, September 28, 2007 – Intersil Corporation (NASDAQ Global Select: ISIL), a world leader in the design and manufacture of high-performance analog semiconductors, today announced the ISL328xE series of single RS-485/RS-422 receivers (Rx) designed with excellent IEC61000-level ESD protection (+/-16.5kV Air Gap and +/-9kV Contact) and an ultra-low supply current requirement in a small SOT-23 and TDFN packages.

The ISL328xE are full featured receivers including 1/8th unit load input resistance (allowing up to 256 devices on the bus), full fail-safe (open, short, and terminated but undriven); along with the enhanced ESD protection on the Rx input pins. These receivers all operate from a wide supply range of 3.0V to 5.5V and at data rates up to 20Mbps.

This family of receivers has low quiescent supply current (Icc = 500uA max) that is 1/30th the value of the nearest competitor, making a significant improvement in power critical applications. Additionally, the devices with an enable pin (ISL3281E, ISL3282E, and ISL3283E) can be put into a low power shutdown mode (Icc = 20uA max) to further reduce power consumption whenever the receiver is disabled. The ISL3281E has an active high enable while the ISL3282E and ISL3283E feature an active low enable for design flexibility.

The ISL3282E and the ISL3284E have on board level translators on the enable input and Rx output pins that simplify the design of mixed voltage systems. The logic supply pin (VL) can be connected to a lower voltage processor supply to level shift the input and output voltages to values compatible with the processor supply. This eliminates the need for external level translators.

The ISL3280E, ISL3281E, ISL3283E, ISL3284E come in SOT-23 packages that occupy a 3mm x 3mm foot print. The ISL3282E comes in a tiny 2mm x 3mm TDFN package for additional board space savings and enhanced thermal performance. All versions are offered in the industrial (-40C to +85C) and extended industrial (-40C to +125C) temperature ranges for enhanced overall reliability.

Pricing and Availability
The ISL328xE family is available now in a variety of configurations: ISL3280E in 5-lead SOT-23 packages; ISL3281E in 6-lead SOT-23 packages; ISL3282E in 8-lead TDFN packages; ISL3283E and ISL3284E, both in 6-lead SOT-23 packages.

One-thousand unit quantities are $0.68 for industrial temperature grade and $0.95 for extended industrial temperature grade.
http://www.intersil.com/products/partsearch.asp?txtprodnr=isl328

Note to editors: To view a high-resolution downloadable photo of ISL328xE, visit Intersil’s photo room at: http://www.intersil.com/pressroom/photoarchives.asp.

About Intersil’s Interface Portfolio
Intersil offers a wide range of RS-232, RS-485/RS-422, and Multi-Protocol transceivers. The RS-232 family of devices operates off of 3.3V or 5V supplies, has many combinations of transmitter and receiver configurations and is protected to IEC61000 ESD specification. The RS-485 family of devices comes in 3.3V or 5V supply operation, support full/half duplex modes with many speed  grades to chose from and the devices are protected to 15kV HBM ESD. To learn more, visit Intersil’s Interface Website at http://www.intersil.com/interface/. About Intersil
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, other handheld systems, and notebooks. Intersil’s product families address power management functions and analog signal processing functions. Intersil products include ICs for battery management, hot-swap and hot-plug controllers, linear regulators, power sequencers, supervisory ICs, bridge drivers, PWM controllers, switching DC/DC regulators and power MOSFET drivers; optical storage laser diode drivers; DSL line drivers; video and high-performance operational amplifiers; data converters; interface ICs; analog switches and multiplexers; crosspoint switches; voice-over-IP devices; and ICs for military, space and radiation-hardened applications. For more information about Intersil or to find out how to become a member of our winning team, visit the Company's web site and career page at www.intersil.com.

Press Contacts

We’re here to assist you as you develop stories about Intersil and our products. Please Contact Support if you need any Technical or Product help.

North America

Kelly Maxwell
PR Manager

Phone: 1-408-546-3582
Email: kmaxwell@intersil.com

Intersil Corporation
1001 Murphy Ranch Road
Milpitas, CA 95035

Asia

Kelly Ang

Phone: +86-21-6335-1198 x115
Email: kang@intersil.com

Intersil Corporation
Unit 1507-11, One ICC, Shanghai ICC, 999 Middle Huaihai Road, Xuhui District, Shanghai, 200031 P.R. China

Japan

Rie Ito

Phone: +81-354392316
Email: rito@intersil.com

Intersil Corporation
6F Mita Nitto Daibiru
3-11-36 Mita Minato-ku
Tokyo 1080073
Japan

Europe

Oliver Davies

Phone: +44 (0) 1225 470 000
Email: oliver.davies@publitek.com

Publitek Limited
18 Brock Street
Bath, BA1 2LW
UK

Germany, Italy, France

Ulrich Mengele

Phonel: +49 (89) 5892 748 16
Email: ulrich.mengele@mengele-pmc.de

Mengele PMC GmbH
Gesslerstr. 15, 80689 München
www.mengele-pmc.de

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter