Applications

Related Resources

Photos

ISL78200
ISL78200

Oct 20 2011
Low Res | High Res

Press Releases
Intersil's 2.5A Buck Regulator Operates During 'Cold Crank' Conditions

AEC-Q100 Qualified ISL78200 Switches to Boost Mode with Low Input Voltages

Milpitas, CA - October 20, 2011 - Intersil Corporation (NASDAQ Global Select: ISIL) has released a new 2.5A step-down regulator that automatically boosts the input voltage to maintain regulation.

Loss of regulation due to drooping input voltage is a common problem in automotive applications. Such input dropouts - commonly called 'cold crank' conditions - occur when starting a car in cold conditions, but can now occur in vehicles with start-stop operation.

The ISL78200 is a synchronous buck/pre-boost IC that automatically activates a pre-boost stage when required to maintain output regulation. It integrates a low side MOSFET driver along with a 90 milliohm high side MOSFET. The ISL78200 can accommodate a wide input voltage range of 3V to 40V while supplying a regulated 5V, 2.5A output at 85 degrees C without heat sinking. The combination of input voltage pre-boosting and step-down regulation with a low 180uA quiescent current makes the ISL78200 ideal for a wide range of automotive power applications.

Also available now from Intersil is the ISL78205, a similar regulator that does not provide pre-boost capabilities. Like the ISL78200, it is designed for full 2.5A output at 85 degrees C, and can be used for general purpose power regulation and 24V bus power applications. Both devices are AEC-Q100 qualified and TS16949 certified. Intersil will feature the ISL78200 and ISL78205 at the annual Battery Show in Novi, Michigan on October 25-27, 2011.

Features and Specifications

  • Regulation maintained even with inputs voltages down to 3V (ISL78200)
  • Wide 3V to 40V input voltage range
  • 2.5A output capability without heat sinking (up to 85C ambient)
  • Guaranteed 3.0A cycle-by-cycle current limit
  • 180uA quiescent current
  • Programmable switching frequency from 200kHz to 2.2MHz with synchronization capability
  • Selectable forced-PWM and PFM operating modes
  • AEC-Q100 qualified and TS16949 certified

Pricing and Availability
The ISL78200 and ISL78205 are available in 20-pin HTSSOP packages with pricing at $0.98 and $0.88 each, respectively, in 50,000-unit quantities. For more information please visit http://www.intersil.com/products/deviceinfo.asp?pn=ISL78200

To view a high-resolution downloadable photo, please visit Intersil's photo room at: http://www.intersil.com/pressroom/photoarchives.aspx.

About Intersil
Intersil Corporation is a leader in the design and manufacture of high-performance analog, mixed signal and power management semiconductors. The Company's products address some of the fastest growing markets within the communications, computing, consumer and industrial industries. For more information about Intersil or to find out how to become a member of our winning team, visit the Company's web site and career page at www.intersil.com.

Intersil, the Intersil logo and R4 are trademarks or registered trademarks of Intersil Corporation. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Press Contacts

We’re here to assist you as you develop stories about Intersil and our products. Please Contact Support if you need any Technical or Product help.

North America

Kelly Maxwell
PR Manager

Phone: 1-408-546-3582
Email: kmaxwell@intersil.com

Intersil Corporation
1001 Murphy Ranch Road
Milpitas, CA 95035

Asia

Kelly Ang

Phone: +86-21-6335-1198 x115
Email: kang@intersil.com

Intersil Corporation
Unit 1507-11, One ICC, Shanghai ICC, 999 Middle Huaihai Road, Xuhui District, Shanghai, 200031 P.R. China

Japan

Rie Ito

Phone: +81-354392316
Email: rito@intersil.com

Intersil Corporation
6F Mita Nitto Daibiru
3-11-36 Mita Minato-ku
Tokyo 1080073
Japan

Europe

Oliver Davies

Phone: +44 (0) 1225 470 000
Email: oliver.davies@publitek.com

Publitek Limited
18 Brock Street
Bath, BA1 2LW
UK

Germany, Italy, France

Ulrich Mengele

Phonel: +49 (89) 5892 748 16
Email: ulrich.mengele@mengele-pmc.de

Mengele PMC GmbH
Gesslerstr. 15, 80689 München
www.mengele-pmc.de

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter