Applications

Related Resources

Photos

EL5150, EL5151, EL5152, EL5153, EL5156, EL5157
EL5150, EL5151, EL5152, EL5153, EL5156, EL5157

Jan 15 2004
Low Res | High Res

News & Events
Intersil Introduces World's Most Accurate High Speed Op Amps

— New Elantec EL515x series features 0.3 mV output offset voltage combined with exceptional AC performance


MILPITAS, CA, January 15, 2004 – Intersil Corporation (NASDAQ: ISIL), a world leader in the design and manufacture of high performance analog solutions, today introduced six new high-accuracy, high-speed amplifiers for measurement and data acquisition applications that require 0.01% accuracy or more.

The Elantec® EL515x series of op amps operate off split +/-5V or single 5 V to 12 V supplies. This family of devices sets a new standard for expectations of DC accuracy in high-speed op amps. With a worst-case voltage offset at under 1 mV and typically 0.3 mV, these devices also provide 0.1 uA maximum input bias current over a wide temperature range. The combination of low offsets, minimal bias currents, with a range of devices focusing on low power consumption at one extreme and ultra high-speed at the other extreme will enable a wide variety of sensors in medical, automotive, bar code scanning, and instrumentation applications.

“Prior to the release of these parts, high speed amplifiers typically sacrificed DC performance but we now offer the flexibility to handle high bandwidth signals at high gains while maintaining 0.01% DC accuracy," said Sameer Vuyyuru, Intersil's director of marketing for video and op amps. "The EL515x series is an illustration of our commitment to serve every high speed amplifier application.”

EL5150 & EL5151 Key Features
  • Less than 1 mV voltage offset and 0.1 uA input bias current
  • -3 dB bandwidth of 200 MHz
  • 110 V/us slew rate
  • Open loop gains of 50 kV/V
  • Low supply current – 1.4 mA
  • SO8, SOT23-6, and SOT23-5 packaging
EL5152 & EL5153 Key Features
  • Less than 1 mV voltage offset and 0.3 uA input bias current
  • -3 dB bandwidth of 300 MHz
  • 210 V/us slew rate
  • Open loop gains of 50 kV/V
  • Low supply current – 3 mA
  • SO8 and SOT23-5 packaging
EL5156 & EL5157 Key Features
  • Less than 1 mV voltage offset and 1.0 uA input bias current
  • -3 dB bandwidth of 630 MHz
  • 640 V/us slew rate
  • Open loop gains of 63 kV/V
  • Low supply current – 6 mA
  • SO8 and SOT23-5 packaging
Availability and Pricing
All six parts are available now and prices are given for 1,000-unit volume. The EL5150, available in SO8 and SOT23-6 packages, and the EL5151, available in a SOT23-5 package, are priced at $0.69. The EL5152, available in a SO8 package, and the EL5153, available in a SOT23-5 package, are priced at $0.89. The EL5156, available in a SO8 package, and the EL5157, available in a SOT23-5 package, are priced at $1.29. To learn more about Intersil’s Elantec operational amplifiers, visit the Intersil web site at: www.intersil.com/opamps. About Intersil
Intersil Corporation is a leader in the design and manufacture of high performance analog semiconductors. The company’s products address three of the industry’s fastest growing markets: flat panel displays, optical storage (CD and DVD recordable) and power management. Intersil products include power management devices for battery management, hot-swap and hot-plug controllers, linear regulators, supervisory ICs, switching DC-DC regulators and power MOSFET drivers; optical storage laser diode drivers; DSL line drivers; video and high performance operational amplifiers; data converters; interface ICs; analog switches and multiplexers; crosspoint switches; voice-over-IP devices; and ICs for military, space and rad-hard applications. For more information about Intersil or to find out how to become a member of our winning team, visit the company’s web site and career page at www.intersil.com.

This release may include "forward looking statements" that are subject to risks and uncertainties. For information identifying economic, political, climatic, currency, regulatory, technological, competitive and some other important factors that could cause actual results to differ materially from those anticipated in the forward looking statements, see Intersil’s Safe Harbor Forward Looking Statement disclaimer found at http://www.intersil.com/legal.asp, as well as Intersil’s SEC filings as updated from time to time, found at http://www.sec.gov. Elantec is a registered trademark of Intersil Corporation or one of its subsidiaries.

Press Contacts

We’re here to assist you as you develop stories about Intersil and our products. Please Contact Support if you need any Technical or Product help.

North America

Kelly Maxwell
PR Manager

Phone: 1-408-546-3582
Email: kmaxwell@intersil.com

Intersil Corporation
1001 Murphy Ranch Road
Milpitas, CA 95035

Asia

Kelly Ang

Phone: +86-21-6335-1198 x115
Email: kang@intersil.com

Intersil Corporation
Unit 1507-11, One ICC, Shanghai ICC, 999 Middle Huaihai Road, Xuhui District, Shanghai, 200031 P.R. China

Japan

Rie Ito

Phone: +81-354392316
Email: rito@intersil.com

Intersil Corporation
6F Mita Nitto Daibiru
3-11-36 Mita Minato-ku
Tokyo 1080073
Japan

Europe

Oliver Davies

Phone: +44 (0) 1225 470 000
Email: oliver.davies@publitek.com

Publitek Limited
18 Brock Street
Bath, BA1 2LW
UK

Germany, Italy, France

Ulrich Mengele

Phonel: +49 (89) 5892 748 16
Email: ulrich.mengele@mengele-pmc.de

Mengele PMC GmbH
Gesslerstr. 15, 80689 München
www.mengele-pmc.de

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter