Applications

Related Resources

Photos

ISL78600, ISL78601
ISL78600, ISL78601

Nov 01 2010
Low Res | High Res

News & Events
Intersil Introduces Hybrid and Electric Vehicle (HEV/EV) Li-Ion Battery Management Control Solution


ISO26262 Compliant ISL78600 Maximizes Vehicle Range and Battery Life

MILPITAS, CA – November 01, 2010 – Intersil Corporation (NASDAQ: ISIL) today introduced its HEV/EV system solution, featuring an automotive grade Li-Ion battery management system and safety monitor. Building upon Intersil's history of providing superior battery management devices for the portable electronics market, the automotive grade (AEC-Q100) ISL78600 multi-cell solution is specifically designed and tested to address the safety, reliability and performance requirements of the hybrid, plug-in hybrid (PHEV) and electric vehicle markets.

To address the stringent safety requirements of the automotive market, Intersil's HEV/EV solution provides customers with ISO26262 (ASIL) compliance to prevent battery pack failures. The solution also provides built-in fault detection for all of its major internal functions and detects external faults such as open wire, over and under voltage as well as temperature and cell balancing faults.

The ISL78600 battery management system provides the high accuracy needed for precise state-of-charge measurements to extend vehicle driving range and the life of high performance Li-Ion batteries. To accomplish this, each ISL78600 device utilizes a 14-bit temperature compensated data converter that scans 12 channels in less than 250 microseconds. Average mid-size HEV vehicles today utilize 126 to 168 cells, which can be addressed with 11 to 14 ISL78600s per vehicle. When combined with four external temperature sensors, the ISL78600 provides superior accuracy for state-of-charge measurements across the full battery operating temperature range.

To achieve the highest possible reliability for intra-system communication, the ISL78600 utilizes a high noise immunity and transient tolerant communication scheme. This fully differential daisy-chain architecture allows the use of low cost twisted pair wiring to stack multiple battery packs together while protecting against hot plugging and high voltage transients. The benefits offered by the Intersil HEV/EV system solution can significantly reduce overall battery management system costs.

The ISL78600 allows for easy connection to microcontrollers via either a 2.5MHz SPI or 400KHz I2C interface, and is specified for -40°C to 105°C operation. Moreover, while targeted at the HEV/EV market, the Intersil solution can easily be adapted to address industrial and battery back-up applications.

The ISL78601 Safety Monitor
Also available today is Intersil's ISL78601 multi-cell battery monitor. Addressing the safety requirements of an HEV/EV battery system, the ISL78601 device provides for standalone or independent redundant fault monitoring. See the related news release, also issued today.

Pricing and Availability
The ISL78600 is available now in a 10mm x 10mm 64-lead TQFP package. Pricing starts at $6.50 each in 10,000-piece quantities. For additional information please visit http://www.intersil.com/auto/.

To view a high-resolution downloadable photo, please visit Intersil's photo room at: http://www.intersil.com/pressroom/hr_photos/20101101_ISL78600_01_hr.JPG

Intersil Automotive Product Line
Intersil has leveraged its success in providing proven, high quality products to the military, space, industrial, computing and consumer markets, and has tailored these technologies for the demanding requirements of the automotive industry.

Intersil automotive products deliver high reliability for the following automotive applications:

About Intersil
Intersil Corporation is a leader in the design and manufacture of high-performance analog, mixed signal and power management semiconductors. The Company's products address some of the fastest growing markets within the automotive communications, computing, consumer and industrial industries. For more information about Intersil or to find out how to become a member of our winning team, visit the Company's web site and career page at www.intersil.com.

Intersil and the Intersil logo are trademarks or registered trademarks of Intersil Corporation. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners.

Press Contacts

We’re here to assist you as you develop stories about Intersil and our products. Please Contact Support if you need any Technical or Product help.

North America

Kelly Maxwell
PR Manager

Phone: 1-408-546-3582
Email: kmaxwell@intersil.com

Intersil Corporation
1001 Murphy Ranch Road
Milpitas, CA 95035

Asia

Kelly Ang

Phone: +86-21-6335-1198 x115
Email: kang@intersil.com

Intersil Corporation
Unit 1507-11, One ICC, Shanghai ICC, 999 Middle Huaihai Road, Xuhui District, Shanghai, 200031 P.R. China

Japan

Rie Ito

Phone: +81-354392316
Email: rito@intersil.com

Intersil Corporation
6F Mita Nitto Daibiru
3-11-36 Mita Minato-ku
Tokyo 1080073
Japan

Europe

Oliver Davies

Phone: +44 (0) 1225 470 000
Email: oliver.davies@publitek.com

Publitek Limited
18 Brock Street
Bath, BA1 2LW
UK

Germany, Italy, France

Ulrich Mengele

Phonel: +49 (89) 5892 748 16
Email: ulrich.mengele@mengele-pmc.de

Mengele PMC GmbH
Gesslerstr. 15, 80689 München
www.mengele-pmc.de

Follow Us Intersil Wins Outstanding Achievement in Web Development

Find pricing and availability for your part number. Order Parts, Eval Boards and Samples

Contact Sales »

myINTERSIL

Sign in to your account…
Search Orders    
Please Wait...

Toolbar

Simply Smarter