| |
| |
|
| |
| 3.3V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver |
| |
|
|
Available in RoHS/Pb-Free
|
|
 Buy direct from Intersil
|
 Check distributor inventory
|
 Request samples
|
|
 |
 |
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL83483IB |
Active |
Ind |
8 Ld SOIC |
1 |
1.23 |
|  |
 |
 |
|
|
| ISL83483IB-T |
Active |
Ind |
8 Ld SOIC T+R |
1 |
1.23 |
|  |
|
|
|
|
| ISL83483IBZ |
Active |
Ind |
8 Ld SOIC |
1 |
1.23 |
 |
 |
|
|
|
|
| ISL83483IBZ-T |
Active |
Mil |
8 Ld SOIC T+R |
1 |
1.23 |
|
 |
|
|
|
|
| ISL83483IP |
Active |
Ind |
8 Ld PDIP |
N/A |
1.23 |
|  |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
These Intersil RS-485/RS-422 devices are BiCMOS 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for 10% tolerance supplies (3V to 3.6V).
The ISL83483 and ISL83488 utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications.
Data rates up to 10Mbps are achievable by using the ISL83485, ISL83490, or ISL83491, which feature higher slew rates.
Logic inputs (e.g., DI and DE) accept signals in excess of 5.5V, making them compatible with 5V logic families.
Receiver (Rx) inputs feature a “fail-safe if open” design, which ensures a logic high output if Rx inputs are floating. All devices present a “single unit load” to the RS-485 bus, which allows up to 32 transceivers on the network.
Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.
The ISL83488, ISL83490, ISL83491 are configured for full duplex (separate Rx input and Tx output pins) applications. The ISL83488 and ISL83490 are offered in space saving 8 lead packages for applications not requiring Rx and Tx output disable functions (e.g., point-to-point and RS-422). Half duplex configurations (ISL83483, ISL83485) multiplex the Rx inputs and Tx outputs to provide transceivers with Rx and Tx disable functions in 8 lead packages. |
| |
 Key Features |
|
|
| |
-
Operate from a Single +3.3V Supply (10% Tolerance)
-
Interoperable with 5V Logic
-
High Data Rates up to 10Mbps
-
Single Unit Load Allows up to 32 Devices on the Bus
-
Slew Rate Limited Versions for Error Free Data Transmission (ISL83483, ISL83488) up to 250kbps
-
Low Current Shutdown Mode (ISL83483, ISL83485, ISL83491) 15nA
-
-7V to +12V Common Mode Input Voltage Range
-
Three State Rx and Tx Outputs (Except ISL83488, ISL83490)
-
10ns Propagation Delay, 1ns Skew (ISL83485, ISL83490, ISL83491)
-
Full Duplex and Half Duplex Pinouts
-
Current Limiting and Thermal Shutdown for driver Overload Protection
|
| Related Documentation |
|
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | |
 Design Model(s): |
| | | | | |  Parametric Data | | | # of Tx | | 1 | | | # of Rx | | 1 | | | Devices Allowed on Bus | | 32 | | | Half/Full Duplex | | Half | | | High ESD | | No | | | Hot Plug | | No | | | Data Rate (Mbps) | | .25 | | | Slew Rate Limited | | Yes | | | Tx/Rx Enable | | Yes | | | IS EN/DIS (µA) | | 750/650 | | | SHDN ICC (µA) | | .015 | | | VCC Range (V) | | 3.0 to 3.6 | | | VL Pin | | No | | | VCC (min) (V) | | 3 | | | VCC (max) (V) | | 3.6 | |
| | | | | | Applications | | | | - Factory Automation
- Security Networks
- Building Environmental Control Systems
- Industrial/Process Control Networks
- Level Translators (e.g., RS-232 to RS-422)
- RS-232 “Extension Cords”
| | | | | | | | | ISL3170E | | 3.3V Full Duplex, 250kbps Slew Rate Limited With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3172E | | 3.3V Half Duplex, 250kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3173E | | 3.3V Full Duplex, 500kbps Slew Rate Limited With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3175E | | 3.3V Half Duplex, 500kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3176E | | 3.3V Full Duplex, 20Mbps With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3178E | | 3.3V Half Duplex, 20Mbps, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3179E | | ±15kV ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers | | | | ISL3180E | | High ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers | | | | ISL43485 | | 3.3V, Half Duplex, 30Mbps, RS-485/RS-422 Transceiver | | | | ISL83070E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83072E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83073E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83075E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83076E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83078E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83485 | | 3.3V, Half Duplex, 10Mbps, RS-485/RS-422 Transceiver | | | | ISL83488 | | 3.3V, Full Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver | | | | ISL83491 | | 3.3V, Full Duplex, 10Mbps With Enable, RS-485/RS-422 Transceiver | |
|
|
|
Related Devices