| |
|
| |
| Light-to-Digital Output Sensor with Address Selection, High Sensitivity, Gain Selection, Interrupt Function and I2C Interface |
| |
|
|
Available in RoHS/Pb-Free
|
|
 Buy direct from Intersil
|
 Check distributor inventory
|
 Request samples
|
|
 |
 |
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL29004IROZ |
Active |
Ind |
8 Ld ODFN |
4OP |
1.17 |
 |
 |
 |
|
|
|
| ISL29004IROZ-EVALZ |
Active |
|
Eval Board |
N/A |
Contact Us |
|
 |
|
|
|
|
| ISL29004IROZ-T7 |
Active |
Ind |
8 Ld ODFN T+R |
4OP |
1.17 |
|
 |
|
 |
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The ISL29004 is an integrated light sensor with a 16-bit integrating type ADC, I2C user programmable Lux range select for optimized counts/Lux, and I2C multi-function control and monitoring capabilities. The internal ADC provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by artificial light sources.
In normal operation, power consumption is typically 300μA. Futhermore, an available software power-down mode controlled via the I2C interface reduces power consumption to less than 1μA. The device also support a hardware interrupt that remains asserted low until the host clears it through I2C interface.
The ISL29004 is in an 8 Ld ODFN package and has two I2C address pins for multiple devices on the same bus. The ISL29003 is a similar light sensor with a hardwired I2C address that is available in ODFN6 package.
Designed to operate on supplies from 2.5V to 3.3V, the ISL29004 are specified for operation over the -40°C to +85°C ambient temperature range. |
| |
 Key Features |
|
|
| |
-
Range select via I2C
-
Range1 = 1000Lux
-
Range2 = 4000Lux
-
Range3 = 16,000Lux
-
Range4 = 64,000Lux
-
Human eye response (540nm peak sensitivity)
-
Temperature compensated
-
16-bit resolution
-
Adjustable resolution: up to 65 counts per Lux
-
User-programmable upper and lower threshold interrupt
-
Simple output code, directly proportional to Lux
-
50Hz/60Hz rejection
-
2.5V to 3.3V supply
-
8 Ld ODFN (3mmx3mm)
-
I2C address selection
|
| Related Documentation |
|
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | |
 Design Model(s): |
| | | |
| |
 Parametric Data |
| | Peak Sensitivity (nm) | | 550 | | | VS (Min) (V) | | 2.25 | | | VS (Max) (V) | | 3.63 | | | Supply Current (μA) | | 300 | | | Resolution (Bits) | | 16 | | | Lux Range (Max) (Lux) | | 64000 | | | Counts per Lux (Max) (Counts) | | 65 | | | Dark ADC Code @ EV = 0Lux (Max) (Count) | | 1 | | | Gain Selection? | | Y | | | Output Interface | | I2C | | | Address Selection Pins? | | Y | | | Enable Pin? | | Software Enabled | | | Package Dimensions (mm) | | 3.0x3.0x0.70 | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- Ambient light sensing
- Backlight control
- Temperature control systems
- Contrast control
- Camera light meters
- Lighting controls
|
| |
|
|
| |
| | ISL29001 | | Light-to-Digital Sensor | | | | ISL29002 | | Light-to-Digital I2C Sensor | | | | ISL29003 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Interface | | | | ISL29010 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, and I2C Interface | | | | ISL29012 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Interface | | | | ISL29013 | | Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Interface | | | | ISL29015 | | Integrated Digital Ambient Light Sensor and Proximity Sensor | | | | ISL29020 | | A Low Power, High Sensitivity, Light-to Digital Sensor With I2C Interface | |
|
Related Devices