| |
|
| |
| CMOS Programmable Peripheral Interface |
| |
|
| |
| |
|
|
Available in RoHS/Pb-Free
|
|
 Buy direct from Intersil
|
 Check distributor inventory
|
 Request samples
|
|
 |
 |
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| CMP82C55AZ |
Active |
Comm |
40 Ld PDIP |
N/A |
2.58 |
 |
 |
 |
 |
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). The MX82C55A has identical features as the X82C55 with the exception of no bus hold devices on the port pins. It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24 I/O pins which may be individually programmed in two groups of 12 and used in three major modes of operation. The high performance and industry standard configuration of the 82C55A make it compatible with the 80C86, 80C88 and other microprocessors.
Static CMOS circuit design insures low operating power. The Intersil advanced SAJI process results in performance equal to or greater than existing functionally equivalent products at a fraction of the power. |
| |
 Key Features |
|
|
| |
-
Pb-Free Plus Anneal Available (RoHS Compliant) (See Ordering Info)
-
Pin Compatible with OKI MSM82C55A
-
No Bus Hold Devices on any Port Pins
-
24 Programmable I/O Pins
-
Fully TTL Compatible
-
High Speed, No “Wait State” Operation with 8MHz 80C86 and 80C88
-
Direct Bit Set/Reset Capability
-
Enhanced Control Word Read Capability
-
L7 Process
-
2.5mA Drive Capability on All I/O Ports
-
Low Standby Power (ICCSB) 10μA
|
| Related Documentation |
|
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | | |
 Parametric Data |
| | Features | | • Pin Compatible with OKI MSM82C55A
- No Bus Hold Devices on any Port Pins
• 24 Programmable I/O Pins
• Fully TTL Compatible
• High Speed, No "Wait State" Operation with 8MHz 80C86 and 80C88 | |
|
| |
|
|
| |
| | 80C286/883 | | High Performance Microprocessor with Memory Management and Protection | | | | 80C86/883 | | CMOS 16-Bit Microprocessor | | | | 80C88/883 | | CMOS 8-Bit/16-Bit Microprocessor | | | | 82C37A | | CMOS High Performance Programmable DMA Controller | | | | 82C52 | | CMOS Serial Controller Interface | | | | 82C54 | | CMOS Programmable Interval Timer | | | | 82C55A | | CMOS Programmable Peripheral Interface | | | | 82C59A | | CMOS Priority Interrupt Controller | | | | 82C82 | | CMOS Octal Latching Bus Driver | | | | 82C84A | | CMOS Clock Generator Driver | | | | 82C86 | | CMOS Octal Bus Transceiver | | | | 82C88 | | CMOS Bus Controller | | | | 82C89 | | CMOS Bus Arbiter | | | | HD-4702/883 | | CMOS Programmable Bit Rate Generator | | | | HD-6402/883 | | CMOS Universal Asynchronous Receiver Transmitter (UART) | | | | HD-6409/883 | | CMOS Manchester Encoder-Decoder | | | | MD82C59A | | CMOS Priority Interrupt Controller, 5, 8 and 12.5MHz | | | | MD82C59A-5 | | CMOS Priority Interrupt Controller, 5, 8 and 12.5MHz | | | | MQ82C55A | | CMOS Programmable Peripheral Interface | | | | MR82C59A | | CMOS Priority Interrupt Controller, 5, 8 and 12.5MHz | | | | MS82C55A | | CMOS Programmable Peripheral Interface | |
|
