Device Information
 
 
ISL6440 Printer Friendly Version
 
300kHz Dual, 180° Out-of-Phase, Step-Down PWM Controller
 
Datasheets,
Related Docs
& Simulations
DescriptionKey
Features
Parametric
Data
Application
Diagrams
Related
Devices
 
 
Ordering Information
Green/Pb(Lead free) Device  Available in RoHS/Pb-Free
 Buy direct from Intersil  Check distributor inventory  Request samples
Part No. Design-In
Status
Temp. Package MSL Price
US $
PB Free
ISL6440EVAL1Z Active   Eval Board N/A   PB Free iBuy Disti-Buy  
ISL6440IAZ Active Ind 24 Ld QSOP 2   PB Free iBuy Disti-Buy Sample
ISL6440IAZ-T Active Ind 24 Ld QSOP T+R 2   PB Free iBuy Disti-Buy  
ISL6440IAZ-TK Active Ind 24 Ld QSOP T+R 2   PB Free iBuy Disti-Buy  
ISL6440EVAL1 InActive   Eval Board N/A    iBuy    
ISL6440IA InActive Ind 24 Ld QSOP 2    iBuy    
ISL6440IA-T InActive Ind 24 Ld QSOP T+R 2    iBuy    
ISL6440IA-TK InActive Ind 24 Ld QSOP T+R 2    iBuy    
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The ISL6440 is a high-performance, dual-output PWM controller optimized for converting wall adapter, battery or network intermediate bus DC input supplies into the system supply voltages required for a wide variety of applications. Each output is adjustable down to 0.8V. The two PWMs are synchronized 180o out of phase reducing the RMS input current and ripple voltage.

The ISL6440 incorporates several protection features. An adjustable overcurrent protection circuit monitors the output current by sensing the voltage drop across the lower MOSFET. Hiccup mode overcurrent operation protects the DC/DC components from damage during output overload/short circuit conditions. Each PWM has an independent logic-level shutdown input (SD1 and SD2).

A single PGOOD signal is issued when soft-start is complete on both PWM controllers and their outputs are within 10% of the set point. Thermal shutdown circuitry turns off the device if the junction temperature exceeds +150°C.

 
  Key Features
 
  • Wide Input Supply Voltage Range
    • 5.6V to 24V
    • 4.5V to 5.6V
  • Two Independently Programmable Output Voltages
  • Switching Frequency 300kHz
  • Out of Phase PWM Controller Operation
    • Reduces Required Input Capacitance and Power Supply Induced Loads
  • No External Current Sense Resistor
    • Uses Lower MOSFET’s rDS(ON)
  • Programmable Soft-Start
  • Extensive Circuit Protection Functions
    • PGOOD
    • UVLO
    • Overcurrent
    • Overtemperature
    • Independent Shutdown for Both PWMs
  • Excellent Dynamic Response
    • Voltage Feed-Forward with Current Mode Control
  • Pb-Free Plus Anneal Available (RoHS Compliant)
Related Documentation
 
Datasheet(s)   Datasheet(s):
 
Evaluation Board(s)   Evaluation Board(s):
 
Technical Homepage   Technical Homepage:
 
i-Sim   i-Sim:
 
 
  Parametric Data
VIN (min) (V)4.5
VIN (max) (V)24
VOUT (min) (V).8
VOUT (max) (V)24
IOUT (max) (A)10
Switching Freq. (kHz)300
 
  Application Block Diagrams
 
 
 
Applications
 
  • Power Supplies with Two Outputs
  • xDSL Modems/Routers
  • DSP, ASIC, and FPGA Power Supplies
  • Set-Top Boxes
  • Dual Output Supplies for DSP, Memory, Logic, µP Core and I/O
  • Telecom Systems
 
  Related DevicesParametric Table   Parametric Table
 
 ISL6225 Dual Mobile-Friendly PWM Controller with DDR Memory Option 
 ISL6227 Dual Mobile-Friendly PWM Controller with DDR Option 
 ISL6228 High-Performance Dual-Output Buck Controller for Notebook Applications 
 ISL6406 Single Synchronous Buck Pulse-Width Modulation (PWM) Controller 
 ISL6443 300kHz Dual, 180° Out-of-Phase, Step-Down PWM and Single Linear Controller 
 ISL6443A 300kHz Dual, 180° Out-of-Phase, Step-Down PWM and Single Linear Controller 
 ISL6445 1.4MHz Dual, 180° Out-of-Phase, Step-Down PWM Controller 
 ISL6521 PWM Buck DC/DC and Triple Linear Power Controller 
 ISL6530 Dual 5V Synchronous Buck Pulse-Width Modulator (PWM) Controller for DDRAM Memory VDDQ and VTTTermination 
 ISL6531 Dual 5V Synchronous Buck Pulse-Width Modulator (PWM) Controller for DDRAM Memory VDDQ and VTT Termination 
 ISL6539 Wide Input Range Dual PWM Controller with DDR Option 
 ISL8112 High Light-Load Efficiency, Dual-Output, Main Power Supply Controllers 

 

About Us | Careers | Contact Us | Investors | Legal | Privacy | Site Map | Subscribe | Intranet

©2007. All rights reserved.