| |
|
| |
|
| |
| ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers |
| |
| | | | |
|
|
Available in RoHS/Pb-Free
|
|
Buy direct from Intersil
|
Check distributor inventory
|
Request samples
|
|
 |
 |
Part No. |
Design-In Status |
Temp. |
Package |
MSL |
Price US $ |
 |
 |
 |
 |
 |
 | ISL3283EFHZ-T |
Active |
Full-Range Ind |
6 Ld SOT-23 T+R |
2 |
|
 |
 |
 |
 |
 |
 | ISL3283EIHZ-T |
Active |
Ind |
6 Ld SOT-23 T+R |
2 |
|
 |
 |
 |
 |
 |
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
Description |
 |
The Intersil ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E, ISL3285E are ±16.5kV IEC61000 ESD Protected, 3.0V to 5.5V powered, single receivers that meet both the RS-485 and RS-422 standards for balanced communication. These receivers have very low bus currents (+125μA/-100μA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 receivers on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters.
Receiver inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or terminated but undriven.
The ISL3280E and ISL3284E feature an always enabled Rx; the ISL3281E and ISL3285E feature an active high Rx enable pin, and the ISL3282E and ISL3283E include an active low enable pin. All versions are offered in Industrial and Extended Industrial (-40°C to +125°C) temperature ranges.
A 26% smaller footprint is available with the ISL3282E and ISL3285E TDFN package. These devices, plus the ISL3284E, also feature a logic supply pin (VL) that sets the VOH level of the RO output (and the switching points of the RE/RE input) to be compatible with another supply voltage in mixed voltage systems.
For companion single RS-485 transmitters in micro packages, please see the ISL3293E, ISL3294E, ISL3295E, ISL3296E, ISL3297E, ISL3298E data sheet. |
| |
Key Features |
 |
| |
-
IEC61000 ESD Protection on RS-485 Inputs ±16.5kV
-
Class 3 ESD Level on all Other Pins >5kV HBM
-
Pb-Free (RoHS Compliant)
-
Wide Supply Range 3.0V to 5.5V
-
Specified for +125°C Operation
-
Logic Supply Pin (VL) Eases Operation in Mixed Supply Systems (ISL3282E, ISL3284E, ISL3285E Only)
-
Full Fail-safe (Open, Short, Terminated/Undriven)
-
True 1/8 Unit Load Allows up to 256 Devices on the Bus
-
High Data Rates up to 20Mbps
-
Low Quiescent Supply Current 500μA (Max)
-
Very Low Shutdown Supply Current 20μA (Max)
-
-7V to +12V Common Mode Input Voltage Range
-
Tri-statable Rx Available (Active Low or High EN Input)
-
5V Tolerant Logic Inputs When VCC ≤ 5V
|
| Related Documentation |
 |
| |
Datasheet(s): |
| | |
Technical Brief(s): |
| | |
Technical Homepage: |
| | | | | | Parametric Data |  | | # of Tx / # of Rx |  | 1 Rx |  | | Devices Allowed on Bus |  | 256 |  | | Half/Full Duplex |  | N/A |  | | High ESD |  | Yes-IEC61000 |  | | Hot Plug |  | No |  | | Data Rate (Mbps) |  | 20 |  | | Slew Rate Limited |  | N/A |  | | Tx/Rx Enable |  | Active Low |  | | IS EN/DIS (µA) |  | 400 |  | | SHDN ICC (µA) |  | <20 |  | | VCC Range (+V) |  | 3.0 to 5.5 |  |
| | | | | | Applications |  | | | - Clock Distribution
- High Node Count Systems
- Space Constrained Systems
- Security Camera Networks
- Building Environmental Control/Lighting Systems
- Industrial/Process Control Networks
| | | |  | | | | | ISL3156E | | 5V Full Duplex, 20Mbps, IEC61000 ESD Protected with 2.4V Vod RS-485/RS-422 Transceiver | | | | ISL3158E | | 5V Half Duplex, 20Mbps, IEC61000 ESD Protected with 2.4V Vod RS-485/RS-422 Transceiver | | | | ISL3159E | | ±15kV ESD Protected, +125°C, 40Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers | | | | ISL3170E | | 3.3V Full Duplex, 250kbps Slew Rate Limited With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3171E | | 3.3V Full Duplex, 250kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3172E | | 3.3V Half Duplex, 250kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3173E | | 3.3V Full Duplex, 500kbps Slew Rate Limited With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3174E | | 3.3V Full Duplex, 500kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3175E | | 3.3V Half Duplex, 500kbps Slew Rate Limited, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3176E | | 3.3V Full Duplex, 20Mbps With Enable, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3177E | | 3.3V Full Duplex, 20Mbps, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3178E | | 3.3V Half Duplex, 20Mbps, IEC61000 ESD Protected, RS-485/RS-422 Transceiver | | | | ISL3179E | | ±15kV ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers | | | | ISL3180E | | High ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers | | | | ISL3259E | | ±15kV ESD Protected, 100Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers | | | | ISL3280E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers | | | | ISL3281E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers | | | | ISL3282E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, TDFN Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers | | | | ISL3284E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23 Package, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers | | | | ISL3285E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, 20Mbps, Full Fail-safe, Low Power, RS-485/RS-422 Receivers | | | | ISL3293E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters | | | | ISL3294E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters | | | | ISL3295E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters | | | | ISL3296E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters | | | | ISL3297E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters | | | | ISL3298E | | ±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, SOT-23/TDFN Packaged, Low Power, RS-485/RS-422 Transmitters | | | | ISL4485E | | 5V, Half Duplex, 20Mbps, ±15kV ESD Protected, RS-485/RS-422 Transceiver | | | | ISL4491E | | ±15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, 15Mbps, Full Duplex, RS-485/RS-422 Transceivers | | | | ISL81487 | | 5V, Half Duplex, 5Mbps, RS-485/RS-422 Transceiver | | | | ISL81487E | | 5V, Half Duplex, 5Mbps, ±15kV ESD Protected, RS-485/RS-422 Transceiver | | | | ISL83070E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83071E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83072E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83073E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83075E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83076E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83077E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83078E | | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | | | | ISL83086E | | ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers | | | | ISL83088E | | ±15kV ESD, 5V, Full Fail-Safe, 1/8 Unit Load, RS-485/RS-422 Transceivers | | | | ISL8485E | | ESD Protected to ±15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers | |
|
|
|