| |
|
| |
| Low Noise, Low Power, 16 Taps, Push Button Controlled Potentiometer |
| |
|
| |
| |
|
|
Available in RoHS/Pb-Free
|
|
 Buy direct from Intersil
|
 Check distributor inventory
|
 Request samples
|
|
 |
 |
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| ISL23512WFRU10Z-TK |
Active |
Full-Range Ind |
10 Ld uTQFN T+R |
1 |
0.34 |
 |
 |
 |
 |
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The Intersil ISL23512 is a three-terminal digitally-controlled potentiometer (XDCP) implemented by a resistor array composed of 15 resistive elements and a wiper switching network. The ISL23512 features a push button control, a shutdown mode, as well as an industry-leading μTQFN package.
The push button control has individual PU and PD inputs for adjusting the wiper. To eliminate redundancy, the wiper position will automatically increment or decrement if one of these inputs is held longer than 1s.
Forcing both PU and PD low for more than 2s activates shutdown mode. Shutdown mode disconnects the top of the resistor chain and moves the wiper to the lowest position, minimizing power consumption.
The three terminals accessing the resistor chain naturally configure the ISL23512 as a voltage divider. A rheostat is easily formed by floating an end terminal or connecting it to the wiper.
|
| |
 Key Features |
|
|
| |
-
Solid-state volatile potentiometer
-
Push button controlled
-
Single or Auto increment/decrement
-
Fast Mode after 1s button press
-
Shutdown Mode
-
16 wiper tap points
-
Zero scale wiper position on power-up
-
Low power CMOS
-
VCC = 2.7V to 5.5V
-
Terminal voltage, 0 to VCC
-
Standby current, 3μA max
-
RTOTAL value = 10kΩ
-
Packages
-
10 Ld μTQFN (2.05mmx1.55mm)
-
Pb-free (RoHS compliant)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | # of Devices/ Channels | | 1 | | | # of Taps | | 16 | | | Memory Type | | Volatile | | | Bus Interface Type | | Pushbutton | | | Resistance Options (kΩ) | | 10 | | | VCC Range (V) | | 2.7 to 5.5 | | | VCC (min) (V) | | 2.7 | | | VCC (max) (V) | | 5.5 | | | DCP Single Supply Range (V) | | 0 to 5.5 | | | Resistance Taper | | Linear | | | Wiper Current (mA) | | ±3 | | | Wiper Resistance (Ω) | | 130 | | | Supply Current (μA) | | .6 | | | Max Operating Temp (°C) | | 125 | | | End-to-End Tempco (ppm/°C) | | ±80 | | | Middlepoint Ratiometric Tempco (ppm/°C) | | 25 | | | VL min. terminal voltage (V) | | 0 | | | VH max. terminal voltage (V) | | 5.5 | | | Features | | Shutdown mode and auto increment | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- Volume Control
- LED/LCD Brightness Control
- Contrast Control
- Programming Bias Voltages
|
