| |
|
| |
|
| |
| Precision, 4-Channel, Low-Level, Differential Multiplexer |
| |
| | | | |
|
|
 Buy direct from Intersil
|
 Check distributor inventory
|
 Request samples
|
|
 |
 |
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
 |
|
|
|
|
|
| HI1-0539-5 |
Active |
Comm |
16 Ld CerDIP |
N/A |
9.45 |
|  |
 |
|
|
|
| HI3-0539-5 |
InActive |
Comm |
16 Ld PDIP |
N/A |
Contact Us |
|  |
|
|
|
|
| HI4P0539-5 |
InActive |
Comm |
20 Ld PLCC |
1 |
Contact Us |
|  |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The Intersil HI-539 is a monolithic, 4-Channel, differential multiplexer. Two digital inputs are provided for channel selection, plus an Enable input to disconnect all channels.
Performance is guaranteed for each channel over the voltage range ±10V, but is optimized for low level differential signals. Leakage current, for example, which varies slightly with input voltage, has its distribution centered at zero input volts.
In most monolithic multiplexers, the net differential offset due to thermal effects becomes significant for low level signals. This problem is minimized in the HI-539 by symmetrical placement of critical circuitry with respect to the few heat producing devices.
Supply voltages are ±15V and power consumption is only 2.5mW. |
| |
 Key Features |
|
|
| |
-
Differential Performance, Typical:
-
Low ∆rON,rON, 125oC 5.5Ω
-
Low ∆rON,ID(ON) , 125oC 0.6nA
-
Low ∆rON, Charge Injection 0.1pC
-
Low Crosstalk -124dB
-
Settling Time, ±0.01% 900ns
-
Wide Supply Range ±5V to ±18V
-
Break-Before-Make Switching
-
No Latch-Up
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Homepage: |
| | | | | |  Parametric Data | | | Switch or MUX | | MUX | | | Configuration | | Diff 4x1 | | | rDS(ON) (Ω) | | 650 | | | T(ON) (ns) | | 250 | | | T(OFF) (ns) | | 160 | | | CHG INJ (pC) | | 3 | | | Leakage (nA) | | .15 | | | SRC Cap (pF) | | 5 | | | DRN Cap (ON) (pF) | | 17 | | | IS (A) | | 0.15m | | | VCC Range (±V) | | ±5 to ±18 | |
| | | | | | Applications | | | | - Low Level Data Acquisition
- Precision Instrumentation
- Test Systems
| | | | | | | | | DG406 | | Single 16-Channel/Differential 8-Channel, CMOS Analog Multiplexers | | | | DG407 | | Single 16-Channel/Differential 8-Channel, CMOS Analog Multiplexers | | | | DG408 | | Single 8-Channel/Differential 4-Channel, CMOS Analog Multiplexers | | | | DG409 | | Single 8-Channel/Differential 4-Channel, CMOS Analog Multiplexers | | | | HI-1818A | | Low Resistance, Single 8-Channel, and Differential 4-Channel, CMOS Analog Multiplexers | | | | HI-506 | | Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers | | | | HI-507 | | Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers | | | | HI-508 | | Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers | | | | HI-509 | | Single 16 and 8/Differential 8-Channel and 4-Channel CMOS Analog Multiplexers | | | | HI-516 | | 16-Channel/Differential 8-Channel, CMOS High Speed Analog Multiplexer | | | | HI-518 | | 8-Channel/Differential 4-Channel, CMOS High Speed Analog Multiplexer | | | | HI-524 | | 4-Channel Wideband and Video Multiplexer | |
|
|
|
