| |
|
| |
| Monolithic 1A Step-Down Regulator |
| |
|
| |
| |
|
|
Available in RoHS/Pb-Free
|
|
Buy direct from Intersil
|
Check distributor inventory
|
Request samples
|
|
 |
 |
Part No. |
Design-In Status |
Temp. |
Package |
MSL |
Price US $ |
 |
 |
 |
 |
 |
 | EL7536EVAL1 |
Active |
|
Eval Board |
N/A |
Contact Us |
|  |
 |
|
 |
 | EL7536IY |
Active |
Ind |
10 Ld MSOP |
1 |
1.45 |
|  |
 |
 |
 |
 | EL7536IY-T13 |
Active |
Ind |
10 Ld MSOP T+R |
1 |
1.55 |
|  |
 |
|
 |
 | EL7536IY-T7 |
Active |
Ind |
10 Ld MSOP T+R |
1 |
1.55 |
|  |
 |
|
 |
 | EL7536IYZ |
Active |
Ind |
10 Ld MSOP |
2 |
1.45 |
 |
 |
 |
 |
 |
 | EL7536IYZ-T13 |
Active |
Ind |
10 Ld MSOP T+R |
2 |
1.55 |
 |
 |
 |
|
 |
 | EL7536IYZ-T7 |
Active |
Ind |
10 Ld MSOP T+R |
2 |
1.55 |
 |
 |
 |
|
 |
 | EL7536IY-EVAL |
InActive |
|
Eval Board |
N/A |
Contact Us |
|  |
|
|
 |
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
Description |
 |
The EL7536 is a synchronous, integrated FET 1A step-down regulator with internal compensation. It operates with an input voltage range from 2.5V to 5.5V, which accommodates supplies of 3.3V, 5V, or a Li-Ion battery source. The output can be externally set from 0.8V to VIN with a resistive divider.
The EL7536 features PWM mode control. The operating frequency is typically 1.4MHz. Additional features include a 100ms Power-On-Reset output, <1µA shut-down current, short-circuit protection, and over-temperature protection.
The EL7536 is available in the 10-pin MSOP package, making the entire converter occupy less than 0.15in2 of PCB area with components on one side only. Both packages are specified for operation over the full -40°C to +85°C temperature range. |
| |
Key Features |
 |
| |
-
Less than 0.15in2 (0.97cm2) footprint for the complete 1A converter
-
Components on one side of PCB
-
Max height 1.1mm MSOP10
-
100ms Power-On-Reset output (POR)
-
Internally-compensated voltage mode controller
-
Up to 94% efficiency
-
<1ìA shut-down current
-
Overcurrent and over-temperature protection
-
Pb-Free plus anneal available (RoHS compliant)
|
| Related Documentation |
 |
| |
Datasheet(s): |
| | |
Evaluation Board(s): |
| | |
Technical Homepage: |
| | |
i-Sim: |
| | |
Design Model(s): |
| | | |
| |
Parametric Data |
 | | VIN (min) (V) |  | 2.5 |  | | VIN (max) (V) |  | 5.5 |  | | VOUT (min) (V) |  | .8 |  | | VOUT (max) (V) |  | VIN |  | | IOUT (max) (A) |  | 1 |  | | Iq (µA) |  | 400 |  | | Switching Frequency (MHz) |  | 1.4 |  | | Peak Efficiency (%) |  | 94 |  | | POR |  | Y |  | | BOM Total Footprint |  | 0.78 x 0.27 |  |
|
| |
| |
| Applications |
 |
| |
- PDA and pocket PC computers
- Bar code readers
- Cellular phones
- Portable test equipment
- Li-Ion battery powered devices
- Small form factor (SFP) modules
|
| |
|
 |
| |
| | EL7530 | | Monolithic 600mA Step-Down Regulator with Low Quiescent Current | | | | EL7531 | | Monolithic 1A Step-Down Regulator with Low Quiescent Current | | | | EL7534 | | Monolithic 600mA Step-Down Regulator | | | | ISL6410 | | Single Synchronous Buck Regulator with Integrated FET for WLAN Chipsets | | | | ISL6410A | | Single Synchronous Buck Regulator with Integrated FET for WLAN Chipsets | | | | ISL6412 | | Triple Output, Low-Noise LDO Regulator with Integrated Reset Circuit | | | | ISL6416 | | Triple Output, Low-Noise LDO Regulator with Integrated Reset Circuit | | | | ISL6455 | | 0.6A PWM Regulator and Dual 0.3A LDOs and Reset | | | | ISL6455A | | 0.6A PWM Regulator and Dual 0.3A LDOs and Reset | | | | ISL97536 | | Monolithic 1A Step-Down Regulator with Low Quiescent Current | |
|