| |
|
| |
| High Speed, Monolithic Pin Driver |
| |
|
| |
| |
|
|
Available in RoHS/Pb-Free
|
|
 Buy direct from Intersil
|
 Check distributor inventory
|
 Request samples
|
|
 |
 |
Part No. |
Design-In
Status |
Temp. |
Package |
MSL |
Price
US $ |
|
|
|
|
|
|
| EL7154CN |
Active |
Ind |
8 Ld PDIP |
N/A |
2.48 |
|  |
 |
 |
|
|
| EL7154CNZ |
Active |
Ind |
8 Ld PDIP |
N/A |
2.48 |
 |
 |
|
|
|
|
| EL7154CS |
Active |
Ind |
8 Ld SOIC |
1 |
2.48 |
|  |
|
|
|
|
| EL7154CS-EVAL |
Active |
|
Eval Board |
N/A |
Contact Us |
|  |
|
|
|
|
| EL7154CS-T13 |
Active |
Ind |
8 Ld SOIC T+R |
1 |
2.57 |
|  |
|
|
|
|
| EL7154CS-T7 |
Active |
Ind |
8 Ld SOIC T+R |
1 |
2.57 |
|  |
|
|
|
|
| EL7154CSZ |
Active |
Ind |
8 Ld SOIC |
3 |
2.48 |
|
 |
|
|
|
|
| EL7154CSZ-T13 |
Active |
Ind |
8 Ld SOIC T+R |
3 |
2.57 |
|
 |
|
|
|
|
| EL7154CSZ-T7 |
Active |
Ind |
8 Ld SOIC T+R |
3 |
2.57 |
|
 |
|
|
|
|
| The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice. |
| MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020 |
| SMD = Standard Microcircuit Drawing |
|
| |
 Description |
|
|
The EL7154 three-state pin driver is particularly well suited for ATE and level shifting applications. The 4A peak drive capability, makes the EL7154 an excellent choice when driving high speed capacitive lines.
The P-Channel MOSFET is completely isolated from the power supply, providing a high degree of flexibility. Pin (7) can be grounded, and the output can be taken from pin (8) when a “source follower” output is desired. The N-Channel MOSFET has an isolated drain, but shares a common bus with pre-drivers and level shifter circuits. This is necessary to ensure that the N-Channel device can turn off effectively when VL goes below GND. In some power-FET and IGBT applications, negative drive is desirable to insure effective turn-off. The EL7154 can be used in these applications by returning VL to a moderate negative potential. |
| |
 Key Features |
|
|
| |
-
Comparatively low cost
-
Three-State output
-
3V and 5V Input compatible
-
Clocking speeds up to 10MHz
-
20ns Switching/delay time
-
4A Peak drive
-
Isolated drains
-
Low output impedance: 2.5Ω
-
Low quiescent current: 5mA
-
Wide operating voltage: 4.5V to16V
-
Isolated P-Channel device
-
Separate ground and VL pins
-
Pb-free plus anneal available (RoHS compliant)
|
| Related Documentation |
|
|
| |
 Application Note(s): |
|
| |
 Datasheet(s): |
| | |
 Technical Brief(s): |
| | |
 Technical Homepage: |
| | | |
| |
 Parametric Data |
| | # of Drivers | | 1 | | | Max Operating Frequency (MHz) | | 10 | | | Peak Output IPK (A) | | 4 | | | Rise Time (ns) | | 20 | | | Fall Time (ns) | | 20 | | | Turn On Delay (ns) | | 10 | | | Turn Off Delay (ns) | | 20 | | | IS (mA) | | 2.5 | | | RON (Ω) | | 1.5 | | | Input Signal Range (V) | | 0 to VP | | | Input Supply Range (VP) | | +4.5 to +16 | | | Max Input Signal (V) | | 16 | | | Output Signal Range (V) | | -3 to +15.5 | | | Max Output Signal Range (V) | | 15.5 | |
|
| |
 Application Block Diagrams |
|
| |
|
| |
| |
| Applications |
|
| |
- Loaded circuit board testers
- Digital testers
- Level shifting below GND
- IGBT drivers
- CCD drivers
|
| |
|
|
| |
| | EL7104 | | High Speed, Single Channel, Power MOSFET Driver | | | | EL7155 | | High Performance Pin Driver | | | | EL7156 | | High Performance Pin Driver | | | | EL7158 | | Ultra-High Current Pin Driver | | | | EL7182 | | 2-Phase, High Speed CCD Driver | | | | ISL55100A | | Quad 18V Pin Electronics Driver/Window Comparator | | | | ISL55100B | | Quad 18V Pin Electronics Driver/Window Comparator | | | | ISL55110 | | Dual, High Speed MOSFET Driver | | | | ISL55111 | | Dual, High Speed MOSFET Driver | |
|
