The 5962-0625601QHC and 5962-0625602QHC are fully DSCC SMD compliant parts and the SMD data sheets are available on the DSCC website (http://www.dscc.dla.mil/programs/specfind/default.asp). The 5962-0625601QHC is electrically equivalent to the EL5166, the 5962- 0625602QHC is electrically equivalent to the EL5167. Reference equivalent “EL” data sheet for additional information. The amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1.4GHz at A_V = +1 and 800MHz at A_V = +2. This makes these amplifiers ideal for today's high speed video and monitor applications, as well as a number of RF and IF frequency designs.

With a supply current of just 12mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers offer very high performance for little power consumption.

The 5962-0625601QHC also incorporates an enable and disable function to reduce the supply current to 13ìA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier.

• Gain-of-1 bandwidth = 1.4GHz/gain-of-2 bandwidth = 800MHz
• 6000V/μs slew rate
• Single and dual supply operation from 5V to 12V
• Low noise = 1.5nV/√Hz
• 12mA supply current
• Fast enable/disable (5962-0625601QHC only)

• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters