The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
Description
The ISL6263C IC is a Single-Phase Synchronous-Buck PWM voltage regulator for GPU core power application. It features Intersil’s Robust Ripple Regulator (R3) Technology™. Integrated current monitor, differential remote sense amplifier, MOSFET driver and bootstrap diode result in smaller implementation area and lower component cost.
Intersil’s R3 Technology™ combines the best features of both fixed-frequency PWM and hysteretic PWM, delivering excellent light-load efficiency and superior load transient response by commanding variable switching frequency during the transitory event. For maximum conversion efficiency, the ISL6263C automatically enters diode emulation mode (DEM) when the inductor current attempts to flow negative. DEM is highly configurable and easy to set-up. A PWM filter can be enabled, which prevents the switching frequency from entering the audible spectrum as a result of extremely light load while in DEM.
The GPU core voltage can be dynamically programmed from 0.41200V to 1.28750V by the five VID input pins without requiring sequential stepping of the VID states. The ISL6263C requires only one capacitor for both the soft-start slew-rate and the dynamic VID slew-rate by internally connecting the SOFT pin to the appropriate current source. The voltage Kelvin sensing is accomplished with an integrated unity-gain true differential amplifier.
Key Features
Precise Single-Phase Core Voltage Regulator
0.5% System Accuracy 0°C to +100°C
Differential Remote GPU Die Voltage Sense
Real-Time GPU Current Monitor Output
Applications up to 25A
Input Voltage Range: +5.0V to +25.0V
Programmable PWM Frequency: 200kHz to 500kHz
Pre-Biased Output Start-Up Capability
5-Bit Voltage Identification Input (VID)
0.41200V to 1.28750V
25.75mV Steps
Sequential or Non-Sequential VID Change On-the-Fly
Configurable PWM Modes
Forced Continuous Conduction Mode
Automatic Entry and Exit of Diode Emulation Mode
Selectable Audible Frequency PWM Filter
Integrated MOSFET Drivers and Bootstrap Diode
Choice of Current Sense Schemes
Lossless Inductor DCR Current Sense
Precise Resistive Current Sense
Overvoltage, Undervoltage and Overcurrent Protection
Datasheet(s):
Evaluation Board(s):