| |
|
| |
| Intersil Supported Functions |
| ______________________________________________________________________ |
| |
Interface  |
| | ISL83070E | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers |
| | ISL83073E | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers |
| | ISL83076E | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers |
| | ISL83078E | ±15kV ESD Protected, 3.3V, Full Fail-safe, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers |
| | ISL41334 | ±15kV ESD Protected, 5V, Two Port, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL81334 | ±15kV ESD Protected, 5V, Two Port, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL41387 | ±15kV ESD Protected, 5V, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL81387 | ±15kV ESD Protected, 5V, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL3180E | High ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe, RS-485/RS-422 Transceivers |
| | ISL3241E | QFN Packaged, ±15kV ESD Protected, +2.7V to +3.6V, 250kbps, RS-232 Transmitters/Receivers with Separate Logic Supply Pin |
| | ISL3243E | QFN Packaged, ±15kV ESD Protected, +2.7V to +3.6V, 250kbps, RS-232 Transmitters/Receivers with Separate Logic Supply Pin |
| | ISL3330 | 3.3V, ±15kV ESD Protected, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL3331 | 3.3V, ±15kV ESD Protected, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL3332 | 3.3V, ±15kV ESD Protected, Two Port, Dual Protocol (RS-232/RS-485) Transceivers |
| | ISL3333 | 3.3V, ±15kV ESD Protected, Two Port, Dual Protocol (RS-232/RS-485) Transceivers |
| |
| Battery Management |
| | Fuel Gauges  | |
| | ICL7665S | CMOS Micropower Over/Under Voltage Detector |
| | ICL7673 | Automatic Battery Back-Up Switch |
| | ISL6295 | Low Voltage Fuel Gauge |
| | Battery Chargers  | |
| | ISL6299A | Li-ion/Li-Polymer Battery Charger Accepting Two Power Sources |
| | ISL9200 | Charging System Safety Circuit |
| | ISL9204 | High Input Voltage Charger |
| | ISL9201 | Li-ion Battery Charger |
| | ISL9203A | Li-ion/Li Polymer Battery Charger |
| | ISL9205 | Li-ion Battery Charger |
| | ISL9209C | Charging System Safety Circuit |
| | ISL9212B | Charging System Safety Circuit |
| | ISL9301 | High Input Voltage Charger With Power Path Management |
| | ISL9222A | High Input Voltage Charger |
| | ISL9220 | Switching Charger for 1-Cell and 2-Cell Li-ion Batteries |
| | ISL9220A | Switching Charger for 1-Cell and 2-Cell Li-ion Batteries |
| | ISL9220B | |
| | ISL9230 | High Power Li-Ion Charger W/I-Path Management |
| |
Voltage Regulators  |
| | ISL6271A | Integrated XScale Regulator |
| | ISL6410A | Single Synchronous Buck Regulator with Integrated FET for WLAN Chipsets |
| | ISL8010 | Monolithic 600mA Step-Down Regulator with Low Quiescent Current |
| | ISL65426 | 6A Dual Synchronous Buck Regulator with Integrated MOSFETs |
| | ISL97536 | Monolithic 1A Step-Down Regulator with Low Quiescent Current |
| | ISL97519 | 1% Output Accuracy 600kHz/1.2MHz PWM Step-Up Regulator |
| | ISL8502 | 2A Synchronous Buck Regulator with Integrated MOSFETs |
| | ISL8009A | 1.5A Low Quiescent Current 1.6MHz High Efficiency Synchronous Buck Regulator |
| | ISL8012 | 2A Low Quiescent Current 1MHz High Efficiency Synchronous Buck Regulator |
| | ISL97519A | 600kHz/1.2MHz PWM Step-Up Regulator |
| | ISL97516 | 600kHz/1.2MHz PWM Step-Up Regulator |
| | ISL98012 | 1.8V Input PWM Step-Up Regulator |
| | ISL8013A | 3A Low Quiescent Current 1MHz High Efficiency Synchronous Buck Regulator |
| | ISL8014A | 4A Low Quiescent Current 1MHz High Efficiency Synchronous Buck Regulator |
| | ISL8088 | Dual 800mA Low Quiescent Current 2.25MHz High Efficiency Synchronous Buck Regulator |
| | ISL8022 | Dual 2A/1.7A Low Quiescent Current 2.25MHz High Efficiency Synchronous Buck Regulator |
| | ISL8033 | Dual 3A Low Quiescent Current High Efficiency Synchronous Buck Regulator |
| | ISL8033A | Dual 3A Low Quiescent Current High Efficiency Synchronous Buck Regulator |
| | ISL8036 | Dual 3A 1MHz High Efficiency Synchronous Buck Regulator |
| | ISL8036A | Dual 3A 2.5MHz High Efficiency Synchronous Buck Regulator |
| | ISL80121-5 | 1A Ultra Low Dropout Linear Regulator with Programmable Current Limiting |
| | ISL80101A | High Performance 1A Linear Regulator with Programmable Current Limiting |
| |
Low Noise Amp  |
| | ISL55001 | High Supply Voltage 220MHz Unity-Gain Stable Operational Amplifier |
| | ISL55002 | High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier |
| | ISL55004 | High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier |
| | ISL28276 | Dual Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Precision Op Amp |
| | ISL28114 | Single General Purpose Micropower, RRIO Operational Amplifiers |
| | ISL28214 | Dual General Purpose Micropower, RRIO Operational Amplifiers |
| | ISL28414 | Quad General Purpose Micropower, RRIO Operational Amplifiers |
| | ISL28113 | Single General Purpose Micropower, RRIO Operational Amplifier |
| | ISL28213 | Dual General Purpose Micropower, RRIO Operational Amplifier |
| | ISL28413 | Quad General Purpose Micropower, RRIO Operational Amplifier |
| | EL5236 | Dual Ultra Low Noise Wideband Amplifiers |
| | EL5237 | Dual Ultra Low Noise Wideband Amplifiers |
| |
Voltage Reference  |
| | X60003B-50 | Precision 5.0V SOT-23 FGA Voltage Reference |
| | X60250 | Micro Power Programmable Voltage Reference |
| | ISL60002B12 | Precision Low Power FGA Voltage References |
| | ISL60002B25 | Precision Low Power FGA Voltage References |
| | ISL60002C12 | Precision Low Power FGA Voltage References |
| | ISL60002C25 | Precision Low Power FGA Voltage References |
| | ISL60002D12 | Precision Low Power FGA Voltage References |
| | ISL60002D25 | Precision Low Power FGA Voltage References |
| | ISL21032 | |
| | ISL21007BFB812 | Precision, Low Noise FGA™ Voltage References Not Recommended for New Designs. Recommended Replacement Part ISL21009 |
| | ISL21007CFB812 | Precision, Low Noise FGA Voltage References |
| | ISL21007DFB812 | Precision, Low Noise FGA Voltage References |
| | ISL21007BFB825 | Precision, Low Noise FGA™ Voltage References Not Recommended for New Designs. Recommended Replacement Part ISL21009 |
| | ISL21007CFB825 | Precision, Low Noise FGA Voltage References |
| | ISL21007DFB825 | Precision, Low Noise FGA Voltage References |
| | ISL21009BFB812 | High Voltage Input Precision, Low Noise FGA Voltage References |
| | ISL21009CFB812 | High Voltage Input Precision, Low Noise FGA Voltage References |
| | ISL21009DFB812 | High Voltage Input Precision, Low Noise FGA Voltage References |
| | ISL21009BFB825 | High Voltage Input Precision, Low Noise FGA Voltage References |
| | ISL21009CFB825 | High Voltage Input Precision, Low Noise FGA Voltage References |
| | ISL21009DFB825 | High Voltage Input Precision, Low Noise FGA Voltage References |
| |
Motor Drivers  |
| | HIP4020 | Full Bridge Driver with Integrated 0.5A Power FETs for Small 3V, 5V and 12V DC Motors |
| |
| DCP |
| | Dual  | |
| | X95820 | Dual Digital Controlled Potentiometers (XDCP); Low Noise/Low Power/2-Wire Bus/256 Taps |
| | X93254 | Dual Digitally Controlled Potentiometers (XDCPs) |
| | X93255 | Dual Digitally Controlled Potentiometers (XDCPs) |
| | X93256 | Dual Digitally Controlled Potentiometers (XDCPs) |
| | X95840 | Quad Digital Controlled Potentionmeters (XDCP); Low Noise/Low Power/I2C® Bus/256 Taps |
| | Single  | |
| | ISL95311 | Digitally Controlled Potentiometer (XDCP) |
| | ISL95310 | Digitally Controlled Potentiometer (XDCP) |
| | ISL95710 | Digitally Controlled Potentiometer (XDCP), Terminal Voltage ±2.7V to ±5V, 128 Taps, Up/Down Interface |
| | ISL95711 | Digitally Controlled Potentiometer (XDCP) Terminal Voltage ±2.7V or ±5V, 128 Taps I2C Serial Interface |
| | ISL90726 | Single Volatile 128-Tap Digitally Controlled Potentiometer (XDCP) |
| | ISL22316 | Low Noise, Low Power I2C® Bus, 128 Taps |
| | ISL22319 | Single Digitally Controlled Potentiometer (XDCP) Low Noise, Low Power, I2C Bus, 128 Taps, Wiper Only |
| | ISL22416 | Low Noise, Low Power, SPI® Bus, 128 Taps |
| | ISL22419 | Single Digitally Controlled Potentiometer (XDCP); Low Noise, Low Power, SPI® Bus, 128 Taps, Wiper Only |
| | ISL22511 | Single Push Button Controlled Potentiometer (XDCP), Low Noise, Low Power, 32 Taps, PushButton Controlled Potentiometer |
| | ISL22512 | Single Push Button Controlled Potentiometer (XDCP), Low Noise, Low Power, 16 Taps, PushButton Controlled Potentiometer |
| | ISL23511 | Low Noise, Low Power, 32 Taps, Push Button Controlled Potentiometer |
| | ISL23512 | Low Noise, Low Power, 16 Taps, Push Button Controlled Potentiometer |
| | ISL23315 | Single, Low Voltage Digitally Controlled Potentiometer (XDCP) |
| | ISL23415 | Single, Low Voltage Digitally Controlled Potentiometer (XDCP) |
| |
ADC  |
| | HI5746 | 10-Bit, 40MSPS A/D Converter with CMOS Outputs |
| | HI5766 | 10-Bit, 60MSPS A/D Converter with CMOS Outputs |
| | HI5767 | 10-Bit, 20/40/60 MSPS A/D Converter with CMOS Outputs |
| |
USB Hot Swap  |
| | ISL6119 | USB Dual Port Power Supply Controller |
| | ISL6121 | Single Supply Integrated Current Limiting Controller |
| | ISL6185XXC | Dual USB Port Power Supply Controller - Covering the Commercial 0°C to +70°C Temperature Range Industrial Temp Range Available |
| | ISL6185XXI | Dual USB Port Power Supply Controller - Covering the Industrial -40°C to +85°C Temperature Range Commercial Temp Range Available |
| |
LED Driver  |
| | EL7182 | 2-Phase, High Speed CCD Driver |
| | EL7513 | 12 LEDs Driver (4S3P) |
| | ISL97676 | 6-Channel LED Driver with Phase Shift Control |
| | ISL97671 | 6-Channel SMBus/I2C or PWM Dimming LED Driver with Phase Shift Control |
| | ISL97672 | 6-Channel LED Driver |
| | ISL97673 | 6-Channel SMBus or PWM Dimming LED Driver with Phase Shift Control |
| | ISL97674 | 6-Channel LED Driver with Phase Shift Control and Frame Rate to Dimming Frequency Synchronization |
| | ISL97675 | 4-Channel LED Driver with Phase Shift Control |
| | ISL97682 | Compact 2-Ch LED Drivers with Phase Shift Control |
| | ISL97683 | Compact 3-Ch LED Drivers with Phase Shift Control |
| | ISL97684 | Compact 4-Ch LED Drivers with Phase Shift Control |
| |
WLAN PWR MNGT  |
| | ISL9000A | Dual LDO with Low Noise, Very High PSRR, and Low IQ |
| | ISL9001A | LDO with Low ISUPPLY, High PSRR |
| | ISL9005A | LDO with Low ISUPPLY, High PSRR |
| | ISL9011A | Dual LDO with Low Noise, Low IQ, and High PSRR |
| | ISL9014A | Dual LDO with Low Noise, Low IQ, and High PSRR |
| | ISL9105 | 600mA Low Quiescent Current 1.6MHz High Efficiency Synchronous Buck Regulator |
| | ISL80101 | High Performance 1A LDO |
| | ISL80102 | High Performance 2A Linear Regulator |
| | ZL9101M | Digital DC/DC PMBus 12A Module |
| | ISL9305 | 3MHz Dual Step-Down Converters and Dual Low-Input LDOs with I2C Compatible Interface |
| | ISL9305H | 3MHz Dual 1.5A Step-Down Converters and Dual Low-Input LDOs with I2C Compatible Interface |
| |
RTC  |
| | ISL1218 | Low Power RTC with Battery Backed SRAM |
| | ISL1219 | Low Power RTC with Battery Backed SRAM and Event Detection |
| | ISL1220 | Low Power RTC with 8 Bytes of Battery Backed SRAM and Separate FOUT |
| | ISL1221 | Low Power RTC with Battery Backed SRAM and Event Detection |
| | ISL12008 | I2C Real Time Clock with Battery Backup Low Power RTC with Battery ReSeal Function |
| | ISL12082 | I2C-Bus Real Time Clock with Two Interrupts, Alarm, and Timer Low Power RTC with Battery ReSeal, 2 IRQs, Hundredths of a Second Time, and Crystal Compensation |
| |
Supervisor  |
| | ISL88001 | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages |
| | ISL88002 | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages |
| | ISL88003 | Ultra Low Power 3 Ld Voltage Supervisors in SC-70 and SOT-23 Packages |
| | ISL88016 | 6-Pin Voltage Supervisors with Pin-Selectable Voltage Trip Points |
| | ISL88017 | 6-Pin Voltage Supervisors with Pin-Selectable Voltage Trip Points |
| | ISL88011 | 5 Ld Voltage Supervisors with Adjustable Power-On Reset, Dual Voltage Monitoring or Watchdog Timer Capability |
| | ISL88014 | 5 Ld Voltage Supervisors with Adjustable Power-On Reset, Dual Voltage Monitoring or Watchdog Timer Capability |
| |
USB Multiplexer  |
| | ISL54222A | High-Speed USB 2.0 (480Mbps) Multiplexer |
| | ISL54220 | High-Speed USB 2.0 (480Mbps) Multiplexer |
| | ISL54221 | High-Speed USB 2.0 (480Mbps) Multiplexer |
| | ISL54216 | USB 2.0 High-Speed/UART Dual SP3T (Dual 3 to 1 Multiplexer) |
| | ISL54224 | High-Speed USB 2.0 (480Mbps) Multiplexer with Overvoltage Protection (OVP) and Overvoltage Indicator Output |
| | ISL54225 | High-Speed USB 2.0 (480Mbps) Multiplexer with Overvoltage Protection (OVP) |
| | ISL54226 | High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection |
| | ISL54227 | High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection |
| | ISL54228 | High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) |
| |
Current Sense Amp  |
| | ISL28006 | Micropower, Rail to Rail Input Current Sense Amplifier with Voltage Output |
| | ISL28005 | Micropower, Rail-to-Rail Input Current Sense Amplifier with Voltage Output |
| | ISL28133 | Single Micropower, Chopper Stabilized, RRIO Operational Amplifier |
| | ISL28233 | Dual Micropower, Chopper Stabilized, RRIO Operational Amplifier |
| | ISL28433 | Quad Micropower, Chopper Stabilized, RRIO Operational Amplifier |
| | ISL28130 | Single Micropower, Low Drift, RRIO Operational Amplifier |
| | ISL28230 | Dual Micropower, Low Drift, RRIO Operational Amplifier |
| | ISL28430 | Quad Micropower, Low Drift, RRIO Operational Amplifier |