High Speed Amplifiers and Buffers: Instrumentation, Low Noise, Low Power, Micropower, Precision, Comparators and Transistor Arrays

High Speed Op Amps

Video Products

Intersil op amps are designed to meet today's increasing complexities for communication, video, and imaging applications. This high speed analog portfolio delivers low power, superior drive, and slew rate performance at full bandwidths, making them the perfect choice for video and high speed data transmission, A/D buffering, and high frequency filtering. The complete line of Intersil op amps, buffers, comparators, and transistor arrays covers the DC to GHz frequency range and includes special features like output disable, output limiting, and programmable gain functions.

Sortable Selection Tables

Amplifiers/Buffers

By Bandwidth

By Input Offset Voltage

By Supply Current

Comparators

Fully Differential Wideband Amplifier

High Output Current (DSL Line Drivers)

Instrumentation Amplifiers

Precision Amplifiers

RF Amplifiers

TFT-LCD Voltage References

Transistor Arrays

V_COM Amplifiers

New Products


ISL28246	July 2008

5MHz, Dual Rail-to-Rail Input-Output (RRIO) Op Amps
The ISL28146 and ISL28246 are low-power single and dual operational amplifiers optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries. They feature a gain-bandwidth product of 5MHz and are unity-gain stable with a -3dB bandwidth of 13MHz. More

Datasheet Device Information


ISL28248	July 2008

4.5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps with Very Low Input Bias Current
The ISL28148, ISL28248 and ISL28448 are 4.5MHz low-power single, dual and quad operational amplifiers. The parts are optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries. More

Datasheet Device Information


ISL28268	July 2008

34μA Micro-power Single and Dual Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps
The ISL28168 and ISL28268 are micro-power operational amplifiers optimized for single supply operation over a power supply range of 2.4VDC to 5.5VDC. These devices draw minimal supply current and operate rail-to-rail at the input and output, while providing excellent DC-accuracy, noise and output drive specifications. Competing devices seriously degrade these parameters to achieve micro-power supply current. More

Datasheet Device Information


Most Recent Application Notes

Half Bridge Driver Generates 100V, 10A, 4μs Pulses

Avoiding Instability in Rail-to-Rail CMOS Amplifiers

Choosing and Using Bypass Capacitors

Transmitting SXGA Video Signal through 1kft (300m) CAT-5 Cable

Rail-to-Rail Amplifier Extends Resolution and Range of Light Sensor

Reducing AC Coupling Capacitance in High Frequency Signal Transmission

More Application Notes